型 号	最高压力 (吨) (磅)	压盘尺寸 (英寸)	模具直径 (毫米)	压盘行程 (英寸)	压盘间距 (英寸)	底座尺寸长x宽 (英寸)	高 (英寸)	重量 (磅)
3887	25 50,000	5	13	1	1.5-7.25	31.5x22.75	22	400
4387	40 80,000	5	31	1	1.5-7.25	34x22.75	26	500

以下为美国PE产品
Optima 2x00/4x00/5x00/
7x00 DV 8x00
All N0770603
Optima 4300V/5300V/7300V (bottom) Cyclonic N0771526
Optima 4300V/5300V/7300V (top) Cyclonic N0771527
Optima 2x00/4x00/5x00/7x00 DV/8x00 N0770438
Optima 3000/3000 SCR/3X00 RL N0690269
Optima 3x00 XL/3x00 DV/3000 SCX N0690769
Optima 8x00 2.0 mm i.d. N0781008
Optima 2x00/4x00/5x00/7x00 DV
Sapphire in PFA base, (connects
directly to ESI spray chambers)
1.8 mm i.d. N0777044
Optima 2x00/4x00/5x00/7x00 DV 2.0 mm i.d. N0775247
Optima 3000/3000 SCR/3x00 RL 2.0 mm i.d. N0695495
Optima 3x00 XL/3x00 DV
3000 SCX/4300V/5300V/7300V
2.0 mm i.d. N0695494

3 Sets of two Connectors (in- and outlet)

for Base plate

6 N9306848

Ultra Clean Connector Set - 1/8" SS

3 Sets of two Connectors (in- and outlet)

for Base plate

6 N9306849

Ultra Clean High Flow Connector Set -

Brass 1/4"

3 Sets of two Connectors (in- and outlet)

for Base plate

6 N9306850

Ultra Clean High Flow Connector Set -

1/4" SS

3 Sets of two Connectors (in- and outlet)

for Base plate

6 N9306851

Ultra Clean Flush Cap Replacement Set

2 Flush Caps for Base Plate

2 N9306852

Ultra Clean High Flow Flush Cap 

Replacement Set

2 Flush Caps for High Flow Base Plate

2 N9306853

Ultra Clean Base Plate O-ring 

Replacement Set

Two sets of 10 O-rings for Base plate

20 N9306854

Ultra Clean Wall-mounting Bracket Set

Suitable for genuine Ultra Clean Base plates

N9306855

Ultra Clean 0.5 Micron Particle Filter (1/4" Brass) N9306856

Ultra Clean 0.5 Micron Particle Cup Filter Pack

Replacement Filter Element - pack of 12

N9306857

N9303963

Oxygen 850 cc <1 ppb

Water 12 g <10 ppb

Hydrocarbons 8 g <1 ppb

Replacement cartridge for oxygen, water 

and hydrocarbons

N9303964

N9306135

Oxygen 1000 cc <1 ppb

Water 25 g <30 ppb

Hydrocarbons 19 g <1 ppb (C5

and higher)

Purification System – 3-Head All-Steel System N9306135

Cartridge Set – Gas Purification All System Cartridge

(Replacement)

N9306136

Cartridge – Gas Purification Moisture Replacement N9306137

Cartridge – Gas Purification Hydrocarbon Replacement N9306138

Cartridge – High-Capacity O2

 Replacement N9306004

Hardware – Gas Purification Manifold/Mtg for bench

or wall

N9306140

N9301178

N9301192 N9301179

N9301208

N9301191

N9301193

Helium 1.0 x 10-5

Red

Hydrogen* 1.0 x 10-5

Red

Nitrogen 1.4 x 10-3

Yellow

Argon 1.0 x 10-4

Yellow

Carbon Dioxide 1.0 x 10-4

Yellow

Portable Electronic Leak Detector  N9306089

Soft Carrying Case N9306142

Probe (Fine Tip) N9306063

Temperature Range   -18 to 400 °C (0 to 750 °F)

Response time 500 m/sec

Accuracy   ±2%, or ±2 °C (±3 °F) whichever is greater

Laser Sighting Yes

MiniTemp MT4 N9306074

Tools Come in a Tool Box for Easy Storage and Use N9301327

Shipped in a Plastic Tool Box for Convenient Storage N9301328

Digital Bubble Flow Meter N9302974

Replacement Glass for Digital Bubble Flow Meter N9303429

PerkinElmer Electronic Flowmeter 1000 N9307029

Two-stage 00230522

Three-stage N9300081

Stand N9303314

FlowMark™

Electronic Flowmeter N9307086

Soft Carrying Case N9306142

PSS Splitless Glass Liner Siltek Deactivated Surface Liner 

(with wool) – General purpose use, ideal for chlorinated

pesticides analyses

2 4 86.2 5 N6502001

Split Glass Liner Siltek Deactivated Surface Liner (with wool) –

Universal liner for general purpose analyses. Surface provides

inertness over a wide sample pH range. Wool can be adsorp-

tive if fibers are broken

4 6.2 92.1 5 N6121020

Split Glass Liner (with wool) – Universal liner for general

purpose analyses

4 6 92.1 5 N6502009

Split Siltek Deactivated Glass Liner (with wool) – Universal

liner for general purpose analyses. Deactivated surface provides

minimal bleed and inertness over a wide sample pH range

4 6 92.1 5 N6502010

Clarus Cup Split Glass Liner – Good for both high and low

molecular weight compounds. Sample vaporization is aided by

tortuous flow path and minimizes molecular weight discrimina-

tion. Difficult to clean

4 6 92.1 5 N6502011

Clarus Cyclosplitter Glass Liner – Patented cylindrical design

for dirty samples, easy to clean and allows many injections

before cleaning is required. Not recommended for large

volume injections

4 6 92.1 5 N6502012

Uniliner Deactivated Glass Liner (with wool) – Universal liner

for general purpose analyses

4 6.2 92.1 5 N6121022

Clarus Splitless Glass Liner – Low volume sample analyses,

beneficial with headspace and purge/trap

1 6.2 92.1 5 N6502006

Quartz Liner for Splitless Operation (ships with instrument) –

Standard injector liner

2 6.2 92.1 1 N6121002

Glass Liner for Splitless Operation – Universal liner for general

purpose analyses

2 6.2 92.1 1 N6101372

Deactivated Glass Liner for Splitless Operation (with wool) –

Good for analyses of trace samples

2 6.2 92.1 5 N6121021

Siltek Deactivated Liner (with wool) for Splitless Operation

– Optimum sample dispertion for active samples. Surface

provides inertness over a wide sample pH range. Wool can be

adsorptive if fibers are broken 

2 6.2 92.1 5 N6502004

Quartz Liner for Split Operation – Good for large volume

injection samples

4 6.2 92.1 1 N6121001

Glass Liner for Split Operation – Universal liner for general

purpose analyses

4 6.2 92.1 1 N6101052

Siltek Deactivated Double Gooseneck Glass Liner (with wool)

– Optimum sample dispertion for active samples. Decreases

breakdown of active compounds such as endrin and DDT.

Chamber contains sample vaporization cloud. Not suitable for

PPC systems

4 6.2 92.1 5 N6502003

Cyclo Double Gooseneck Liner for Split Operation – Cylindrical

design for large volume and trace dirty samples. Decreases

injection port discrimination. Cannot be packed with wool and

more difficult to clean

4 6.2 92.1 5 N6502005

Zero Dilution Glass Outer Liner – Ideal for trace HS work. 

Use in conjunction with N1011446

2 6.3 90 1 N1011445

Zero Dilution Glass Inner Liner – Ideal for trace HS work. 

Use in conjunction with N1011445

2 6.3 90 1 N1011446

Quartz Liner for Splitless operation (ships with   instrument) –

Excellent liner for low volume analyses

1 4 86.2 1 N6121006

NEW! Siltek Deactivated Glass PSS Liner – Used for low

volume trace sample analyses

1 4 86.2 5 N6502000

Quartz Liner for Split operation (ships with instrument) – 

Approved PerkinElmer standard injector liner

2 4 86.2 1 N6121004

NEW! Siltek Deactivated Glass Liner for Split operation (with

wool) – Maximum inertness and packed with wool gives opti-

mum sample dispersion. Surface provides inertness over wide

sample pH range. Wool can be adsorptive if fibers are broken

2 4 86.2 5 N6502001

NEW! Siltek Deactivated Glass Liner for Split   operation – 

Max. inertness gives optimum sample dispersion. 

Deactivated surface provides minimal bleed and inertness 

over a wide sample pH range

2 4 86.2 5 N6502002

Zero Dilution Outer Liner –Use in conjunction with N1011446 2.8 4 83 1 N1011447

Zero Dilution Inner Liner –Use in conjunction with N1011447 2 73 1 N1011446

On-column Glass Liner 2.4 4 86.2 1 N6101539

Liner/Hour Glass for POC Injector 2.4 4 19.05 1 N6101703

Quartz Split Liner with Silanized Glass Wool 2 4 86.2 1 N6121008

Quartz Split Liner with Silanized Glass Wool 2 4 86.2 5 N6121009

Drilled Uniliner (hole on top) – Excellent liner for high sample

recovery and linearity, recommended for aqueous injections.

Good for PPC equipped GCs

4 6.2 92.1 5 N6121022

NEW! Drilled Uniliner (hole on bottom) –   Recommended for

analysis in which compounds of interest could be affected by 

a tailing solvent peak. Good for PPC equipped GCs

4 6.2  92.1 5 N6502013

  NEW! Gooseneck Drilled Uniliner (hole on top) – Use for trace,

active samples, high recovery and linearity

4 6.2 92.1 5 N6502014

NEW! Gooseneck Drilled Uniliner (hole on bottom) – Use for

trace, active samples, high recovery and linearity

4 6.2 92.1 5 N6502015

NEW! Open Top Uniliner (with wool) – Packed with fused silica

wool, highly recommended for high molecular weight active

samples. The fused silica wool traps dirt and sample residue

4 6.2 92.1 5 N6502016

NEW! Cyclo Uniliner – Cylindrical design for high molecular

weight samples provides an excellent vaporization surface.

Spiral traps dirt reducing further residue sample interaction

4 6.2 92.1 5 N6502017

Wide-Bore Column Glass Liner 6 4 92.1 1 N6101375

Wide-Bore Column On/Off Quartz Liner 6 4 92.1 1 N6121003

PSS deactivated glass liners with deactivated wool. Narrow

bore and quartz wool increase volatilization and reproducibility

2 4 86.2 5 N9306232

Capillary splitless deactivated glass liners with 

deactivated wool.

4 6.2 92.1 5 N9306233

Capillary splitless deactivated glass liners with 

deactivated wool.

4 6.2 92.1 1 N9306234

Capillary splitless deactivated glass liners with 

deactivated wool.

4 6.2 92.1 5 N9306235

Capillary splitless deactivated glass liners with deactivated

wool. Quartz wool is used to fully vaporize the sample.

4 6.2 92.1 5 N9306236

PSS Splitless deactivated glass liners with deactivated 

wool 5/pk.

1.25 4 86.2 5 N9306237

50 µL Syringe, Metal Plunger 0.63 mm o.d. Needle N6101760

5 µL Syringe, Metal Plunger PTFE-tipped Seal 

0.63 mm o.d. Needle

N6101390

5 μL Syringe, Metal Plunger PTFE-tipped Seal 

0.63 mm o.d. Needle BLUE Barrel (pack of 5 syringes)

N6103240

5 μL Syringe, Metal Plunger PTFE-tipped Seal 

0.63 mm o.d. Needle BLUE Barrel (pack of 10 syringes)

N6103241

5 µL Syringe, Metal Plunger 0.63 mm o.d Needle N6101251

5 µL On-column Syringe Metal Plunger 

0.47 mm o.d Needle

N6101380

0.5 µL Low Injection Volume Syringe, Metal Plunger

0.63 mm o.d. needle

N6101252

0.5 μL Low Injection Volume Syringe Metal Plunger

0.63 mm o.d. Needle BLUE Barrel (pack of 5 syringes)

N6103242

0.5 μL Low Injection Volume Syringe Metal Plunger

0.63 mm o.d. Needle BLUE Barrel (pack of 10 syringes)

N6103243

0.5 µL Low Injection Volume Syringe, Metal Plunger

0.47 mm o.d. Needle

N6101253

0.5 µL 25 1 N9302231

1.0 µL 22 1 00230177

1.0 µL 261

1 00230111

2.0 µL 25 1 N9302235

10 µL 1 #2 N9302210

25 µL 1 #2 N9302211

50 µL 1 #2 N9302212

100 µL 1 #2 N9302213

10 µL 1 #2 N9302222

25/50/100 µL 22S 2 in 3 #2 N9302224

250 µL 22S 2 in 3 #2 N9302226

10 µL3

1 #2 00230523

10 µL2

6 #2 N9302230

25 µL 1 #2 N9302202

25 µL 1 #3 09904823

50 µL 1 #2 N9302203

50 µL 1 #3 09904941

11 mm Electronic Crimper with Battery and Global

Mains Plug Pack

N9304500

20 mm Electronic Crimper with Battery and Global

Mains Plug Pack

N9304501

11 mm Electronic Decapper with Battery and Global

Mains Plug Pack

N9304502

20 mm Electronic Decapper with Battery and Global

Mains Plug Pack

N9304503

6.4 Volt Lithium Ion Battery N9304504

8 mm Hand Crimper 1 N9306127

11 mm Hand Crimper 1 00090699

11 mm Hand Decapper 1 N9301390

20 mm Hand Crimper 1 N9302785

20 mm Hand Decapper 1 N9301270

Bench-top Vial Crimper 1 N6621006

11 mm Crimper Jaws 1 N6621008

20 mm Crimper Jaws 1 N6621009

11 mm Ergonomic Hand Crimper N6621035

11 mm Ergonomic Hand Decapper N6621036

20 mm Ergonomic Hand Crimper N6621037

20 mm Ergonomic Hand Decapper N6621038

2 mL 8 mm Crimp Top Clear Glass Vials 200 N9301069

2 mL 11 mm Crimp Top Clear Glass Vials 100 N9301385

2 mL 11 mm Crimp Top Amber Glass Vials 100 N9302680

2 mL 11 mm Crimp Top Clear Wide Mouth

Glass Vials with Write-On Patch and Fill Lines

100 N9306223

2 mL 11 mm Crimp Top Amber Wide Mouth

Glass Vials with Write-On Patch and Fill Lines

100 N9302679

8mm Silver Crimp Cap with PTFE/

Rubber Septa

1,000 03300806

11 mm Silver Crimp Caps with PTFE/

Silicone Septa

100 N9306228

11 mm Silver Crimp Caps with PTFE/Silicone/

PTFE Septa

100 N9306229

11 mm Silver Crimp Caps with Red 

Rubber Septa

100 N9306230

11 mm Blue Crimp Caps with Telon®/

Rubber Septa

100 N9302686

11 mm Green Crimp Caps with Telon®/

Rubber Septa

100 N9302684

11 mm Red Crimp Caps with Telon®/

Rubber Septa

100 N9302685

11 mm Silver Crimp Caps with Telon®/

Rubber Septa

100 N9306015

11 mm Silver Crimp Cap with Black 

Viton® Septa

1,000 N9302784

2 mL 8 mm Screw Top Clear Glass Vials 100 N9302945

8 mm Screw Caps- No Septa-Phenolic Cap

with hole

100 N9303441

8 mm Screw Caps 100 N9303449

8 mm PTFE-Coated Butyl Rubber Septa for 

8 mm Screw Caps

100 N9303442

2 mL 9 mm Screw Top Clear Vials 100 N9306201

2 mL 9 mm Screw Top Amber Vials 100 N9306220

2 mL 9 mm Screw Top Clear Vials with 

Write-On Patch and Fill Lines

100 N9307801

2 mL 9 mm Screw Top Amber Vials with 

Write-On Patch and Fill Lines

100 N9307802

9 mm Blue Screw Cap PTFE/Silicone Septa 100 N9306202

9 mm Blue Screw Cap Pre-Slit PTFE/

Silicone Septa

100 N9306203

2 mL 10 mm Screw Top Clear Vial 100 N9306053

2 mL 10 mm Screw Top Amber Vial 100 N9306057

10 mm Blue Screw Cap Red Rubber Septa 100 N9306200

10 mm Black Screw Caps PTFE/Silicone Septa 100 N9306205

10 mm Black Screw Caps PTFE/Red 

Rubber Septa

100 N9306206

2 mL 11 mm Clear Snap Wide Opening Vials 100 N9303418

2 mL 11 mm Clear Snap Wide Opening Vials

with Write-On Patch and Fill Lines

100 N9306207

2 mL 11 mm Amber Snap Wide Opening Vials

with Write-On Patch and Fill Lines

100 N9306208

11 mm Pre-slit PTFE/Silicone Clear 

Snap Cap

100 N9303416

11 mm Pre-slit PTFE/Silicone/PTFE Clear 

Snap Cap

100 N9303417

11 mm PTFE/Silicone Clear Snap Cap 100 N9303419

Cap for Waste and Wash Vials (15 mm) 1 ea. 09923032

Clear Waste and Wash Vial 4 mL (15 mm) 1 ea. 09923031

Clear Waste and Wash Vial 4 mL (15 mm) 100 N9306247

Septa for Waste Wash Vials (for use with

Viscous or Toxic Samples)

50 N9302780

Diffusers for Waste and Wash Vials

Diffusers are sold exclusively by PerkinElmer.

The  conical shape allows the needle to 

penetrate into solvent or waste. Reduces 

spillage and large losses through evaporation.

1 N6101276

200-μL Low-Volume Clear Glass Insert 1,000 N9302681

Vial Support for Insert 500 N9302682

6 mm x 29 mm Clear Glass Insert, Rimless

Pulled Point with Bottom Spring, 250 μL

Usable Volume

100 N9300703

6 mm x 31 mm Clear Glass Flat Bottom Insert,

400 μL Usable Volume

100 N9300704

Use with:

10 mm 2 mL Amber Screw Top Vial 

w/White “P” Icon w/Patch

10 mm 2 mL Clear Screw Top Vial 

w/White “P” Icon w/Patch

11 mm Clear Large Opening Snap Ring Vial 

w/Black“P” Icon

11 mm Clear Large Opening Crimp Vial 

w/Black “P” Icon

9 mm 2 mL Amber Screw Top Vial 

w/Black “P” Icon

9 mm 2 mL Clear Screw Top Vial 

w/Black “P” Icon

N9306057

N9306053

N9303418

N9306231