LEJIA III

1、PRODUCT OVERVIEW

SOLA domestic solar water heater production fresh water, closed corrugation coil tube design with open tank design. Pressure of hot water from cold water (pressure of cold water need 2-5 bar ). And it have 5% heat waste.
 

2、parameter of LEJIA III

NAME	LEJIA III
type	Pressurized type
Solar collector	Heat pipe
Absorbing coating	Interference coating
diameter of vacuum tube	58mm
Length of vacuum tube	1800mm
Material of inner conatiner	0.6mm SUS304 stainless steel
diameter of inner tank	380mm
Material of coating	1mm galvanization coating sheet
Thermal insulation layer	60mm high density polyurethane
support	Galvanization tower - type support
Support bolt	M8 SUS304
Pressure of safety valve	8 bar

3、the sketch map of water connector

4、production specification ：

type	SLCX-240L/24-5818
series	LEJIA III
QTY of heat collect pipe	24 PCS
Acreage of solar collector	3.03 ㎡
Totally water capacity	305L
Coil heat exchanger	19/26 316L stainless steel
Coil pipe holder	PP bracket
Product net weight	249kg
Total weight with full water	554kg
Electric heat producer	1500W
Boiler connector（selective accessories）	CALFFI 263 type
Constant pressure expansiondrum （selective accessories）	2L

5、product dimensions


 

6、the sketch map of solar water heater installing on flat roof

7、the sketch map of solar water heater installing on the slop roof

8、installation dimensions

Model	Overall dimension(mm)			Installing hole dimension(mm)				Angle	Material of coil Tube
	W	L	H	A	A1	A2	B
SLCX-240L/24-5818	2160	1942	1776	2060	1030	1030	1510	45°	SUS304 Stainless steel

 

9、advantage

• Pressurized water with unpressurized tank , easy to adjust water temperature .
• fresh hot water with out nitrite and germs
• Don't have to consider height restrictions ,can be installing on the ground .
• Drinking water as enough for cooking , the material of tube is SUS304 - 2B stainless steel .
• It is easy to combine with other heat producer （electric/gas water heater and boiler )
• No water leakage.water tank connect water nozzle with crimping seal 。
• Special water tube resist -40°C low temperature .
• Thermal Insulation tube resist 120°C high temperature .
• The shape and capacity of water tank can be customized 。
• One heat pipe broken doesn't effect the whole system
• System more strong . Thickening the inner water container 、Coating 、bracket and etc