Indications

1. Remove undesired hair permanently from various areas of the body for all kinds of hair color;                                       
2.Remove speckles, age spot, sun-induced freckles from various types of skin;
3. Remove facial vascular lesions;             
4. Skin rejuvenating and lessen deep wrinkles;                                    
5. Tighten skin and remove acne

Feature of the system

·         Bipolar Radio frequency and IPL work separately.

·         Treatment head with water lock be easily and safely changed.

·         The connector is general used and be connected with other IPL equipments treatment head.

·         8.4inch high digital multi-color screen

·         The rest time between shoots is only 1.5s

·         Design of modularization for easy maintenance

Principle of the technology

E-Light is the latest technology, which combines the electricity, light and cooler perfectly on one treatment head and works at same time.  

Bipolar Radio Frequency reach deep into the skin and heat up tissue. Then lower energy be applied during the IPL treatment but without reduce the result. . Uncomfortable feeling during the treatment will be decreased significantly. 

The radio frequency energy is not concerned with melanin. So, the E-Light treatment get good result on the soft or thin hair so as to decrease the risk caused by traditional IPL treatment.

Contact cooling system reduce the heat caused by IPL to decrease the uncomfortable feelings during the treatment. Also, it makes the treatment safer.

Intense Pulsed light supply different wavelength range to works for different functions.

When the three are united in one treatment, wonderful experience and result be expected. The traditional IPL treatment only reach 4mm to the skin, but During E-light treatment, the energy reach to 15mm. The function and result of the treatment be increased greatly.

Specification:

1.Wavelength: 420nm/530nm/560nm/640nm/690nm(optional)
2.Operating interface:8.4” color LCD screen           
3.Frequency:1,2,3,4,5HZ
4.RF frequency:10MHZ
5.E-light energy: 20-50J/cm2(IPL) 0-50J/cm2(RF)
6.Cooling systems  :Semiconductor +Wind cooling +Water cooling
7.Input power :AC 220V(110V)/  50HZ(60HZ)

8.Headpiece:Elight head

9.Spot size:8*34mm /16*57mm (optional)