The Melt blown micro-fiber is self-bonded and formed a 3D pore structure. Diameter and density of micro-fiber can be varying from inner to outer of the filter diameter. Melt Blown Depth Cartridges is designed to have continuously graded pore structure provide both pre-filtration and final-filtration.

High contaminant holding capacity
Longer life service

Low pressure drop
Micro straining melt-blown filtration fiber, high removal rating

PP series cartridges, self-bonded with no chemical binder.
Multi-Layer structure (fibers fineness varying from inner to outer of the filter.)
Cartridges structure and progressively loose from inside to outside, so the cartridges contaminant catching capacity increased and the lifetime is prolonged.

PP Series Safety
F.D.A compliant
Chemical resistance: 100% polypropylene for compatibility with a wide range of process fluids, and good chemical resistance acid.

 

Pre-filter of drinking water system
Pre-filter of R.O system and other commercial and industrial water systems

 

Maximum Operation Pressure Drop 21℃=5.0Kg/cm²

 

100% polypropylene, melt-blown thermal bond fiber.

 

 

RETENTION RATINGS (μ m)

Nominal 1, 5, 10, 20, 30, 50, 75, 100 micron

 

 

Inner diameter : 28mm,30mm
Outer diameter: 40mm～115mm

Length:125mm～1270mm