RS232/RS485 Features:

◆ Eight channels analog signal isolated input, RS-485/232 output
◆ 24-bit AD converter, measurement accuracy better than 0.05%
◆ via RS-485/232 interface can be programmed precision calibration module
◆ 3000VDC isolation voltage between input and output
◆ Wide power supply range: 8 ~ 32VDC
◆ High reliability, easy programming and application
◆ International Standard DIN35mm rail mounting for easy centralized wiring
◆ User programmable module address, baud rate, etc.
◆ support Modbus RTU
◆ low cost, small size, SMD placement process design

data acquisition mudle Applications:
◆ signal measurement, monitoring and control
◆ RS-485 remote I / O, data acquisition
◆ intelligent building control, security engineering and other applications
◆ RS-232/485 bus industrial automation control systems
◆ industrial field signal isolation and long-term transmission
◆ monitoring equipment operation
◆ sensor signal measurement
◆ industrial data acquisition and recording
◆ medical, industrial product development
◆ 4-20mA ,0-20mA ,0-10V or 0-5V signal acquisition

D/A converter GENERAL DESCRIPTION:

JSD81 A08 series products realize the signal acquisition between sensor and host, to measure analog signals. JSD81 A08 series products can be applied to RS-232/485 bus industrial automation control system, 4-20mA / 0-5V signal measurement, monitoring and control , 0-75mV ,0-100mV and other small-signals measurement and signals isolation and long-term industrial transmission and so on.

Products include power supply isolation, signal isolation, linearization, A/D conversion and RS-485 serial communication. Each serial interface can connect up to 255 pieces JSD AD11 Series modules, communication using ASCII code or MODBUS RTU communication protocol, and its instruction set compatible with the ADAM modules, baud rate can be set by the code, with other manufacturers control module hang in the same RS-485 bus for easy programming

JSD81 A08 series is based on SCM intelligent monitoring and control system, all of the users set configuration information ​​such as Calibration value, address, baud rate, data format, checksum and status are stored in non-volatile memory EEPROM.
JSD81 A08 series products according to industry standard design and manufacture .They are three-port isolation(input, output and power supply),and the isolation voltage between them is up to 3000 VDC, JSD81 A08 series products have better Anti-interference ability, high reliability and wide operating Temperature Range (- 45℃～+85℃。)

Download：http://www.jsd-iae.com/down/201257135150745.pdf