ISO9000:2008 certified precision module .The MG Series is ideal for OEM applications requiring a competitively priced, precision high voltage module.

Low noise:5mV
High stability:0.001%
Line Regulation:0.001%
Load Regulation:0.001%
Temperature Coefficient:Better than 25ppm/C.
Compact and light weight
Both external VR or voltage control

APPLICATIONS
High voltage testing
PMT,MCP,radiation counter
Electron Beam/Ion Beam
MAss spectrometry
Electrostatic chuck(ESC)
Photomultiplier Tubes
Scintillators
Electron Guns
Ion Guns
Nuclear Instruments
Electrostatic lenses
Spectroscopy
Microchannel Plates

SUMMARY
The MG serise ie a regulated, versatile,modular HV power supply used in a wide variety of applications  including MGss spectrometry and Electron Microcopes.From the OEM to the laboratory,they are an excellent choice when you require a highiy stable output.Output can be controlled using either an external control voltage or external variable resistor.With a diverse range of models up to 6KV/30W,you will find something for nearly every requirement.

SPECIFICATIONS
Input Voltage:
12Vdc1VDC,250mA TYP.
Nominal Voltage Range:
7Vdc to 15Vdc.
Input Current: (typical)
Disabled: 30mA
No load: 90mA
Full load:
250mA TYP
Efficiency:
80-85%, typical
Voltage Re gulation:
Line: <0.001%
Load: <0.001%
Current Re gulation:
Line: <0.001%
Load: <0.001%
Output Voltage:
Continuously adjustable over entire output range. Available
in either positive or negative output polarity. See table for
voltage ranges.
Output Voltage Control: Controlled by either:
1) External potentiometer 100k (set internal pot. to MGx.)
2) Remote differential voltage programming (0 to +5V gives
0 to full output).
Accuracy:
2% on all programming and monitoring,
Temperature Coefficient: (typical)
Optional: 25ppm/C (T Option)
Environmental:
Temperature Range:
Operating: -40C to 65C case temperature
Storage: -55C to 85C, non operational
Humidity:
10% to 90%, non-condensing.
Cooling:
Convection cooled, typical. 60 watt units operating at full power
might require additional cooling to maintain case temperature
below 65C. Methods may include: forced air cooling, use of
heat sink or metal case, etc. It is the users responsibility to
maintain the case temperature below 65C. Damage to the
power supply due to inadequate cooling is considered misuse
and repairs will not be covered under warranty.
Dimensions:
50.8x25.4x12.7
Weight:
30g