Balboa system and Aristech acrylic swimming pool spa 

Certificate

CE,ROHS,CQC,TUV,SGS,ISO9001,CCC,ETL,KC,BV,SAA,CSA,GMC

Detail for the swimming spa

1.swimming spa material:Aristech acrylic

2.total spa size:810x220x150cm

3.wooden skirt(hemlock):1pc

4.Balboa control system

5.contained by two parts:

	SPA part	SWIMming pool part
(1).Size	400x220x95cm	410x220x150cm
(2)seat	lying-4person;sitting-6person	lying-2person
(3)seat depth	72cm	140cm
(4)5" spa jet	4pcs	7pcs
3.5"spa jet	15pcs	7pcs
1"spa jet	116pcs	29pcs
(5)control system	2pcs	2pcs
(6)booster pump	1pc*3HP	3pc*3HP
booster pump	4pc*2HP	2pc*2HP
(7)air blower	1pc*1.5HP
(8)underwater light	1pc	2pcs
(9)skimmer filter	1pc	2pcs
(10)air regulator	2pcs	6pcs
(11)water regulator	6pcs	4pcs
(12)headrest pillow	7pcs	2pcs
(13) circulation pump	1pc*1HP	1pc*1HP
(14).circulation pump	1pc*1HP	1pc*1HP
(15).ozonizer	1pc	1pc
(16).heater	1pc*3kw	1pc*3kw
(17).water diverter with led light	4pcs	4pcs
(18).drain valve	1pc	1pc
(19).suction	6pcs	6pcs
(20).ice box	2pcs	2pcs
(21).waterproof speaker	4pcs	4pcs
(22).stainless steel frame	1pc	1pc
(23).build-in radio	1pc	1pc

Where is the best position to place your swimming pool spa

1.CLOSE FOR COMFORT

You want the sap as close to the back door as possible so you’re steps away from a warm soak.  Think it might look better at the back of your yard? Maybe. But on cold, rainy nights you’ll be glad your hot tub is near the nearest door. You’ll also want it convenient to a bathroom for drying and changing. You’ll also need a spigot within reach and a hose bib for filling.

2.PLAN YOUR PLAY

If you expect to use the tub mostly for adult relaxation, you might choose a more secluded spot in the back yard. If it’s for family gatherings, put it closer to the gathering spot.

Why choose SUNRANS swimming spa

1.Top safety guarantee:

   -All our swimming spa are made strictly according to CE,SAA,RoHS etc. standards.

   -All our swimming spa are with the lesk electricity protection aystem ,power overload protection

    system,overheat protection system and water-lacking protection system etc.

2.Eco-friendly:

   -Best circulation pump.

   -RoHS approval for electronic material,All piping and equipments in our spa is UV-proof               

   -Swimming spa shells are made from USA Aristech acrylic.

3.High-efficient and Energy-saving:

  -Individual control for the massage function of each seat

  -The high-density insulating system for bathtub can effectively prevent the loss of water temperature

 

Remarks

1. In order to avoid accident, make sure children should be taken good care by adult when use swimming spa.

2. In order to damage body from the change of velocity, it should be consistent with the original specification when replace pumps and other accessories of hot tub.

3. In order to avoid the risk of electric shock, none metal parts could be near  swimming spa around 1.5m range.

4. The temperature should be measured before getting into swimming spa it’s no more than 40 degrees.38-40 degree is better.

5. When using swimming spa, if drink or take medicine, you could be obnubilation.

6. In order to reduce the transmission of disease, please have a shower before and after using swimming spa

 

Never do the things as following

1.Don’t use the swim spa for long periods of time at temperature over 38 ° C.

2.Don’t operate the swimming spa without water. Turn the circuit breaker off before emptying the spa and while it is empty.

3.Don’t store chemicals in the spa equipment compartment.

4.Don’t open the electrical box. There are no user serviceable parts inside.

5.Don’t stand on the spa cover.

6.Don’t operate the pumps on hi-speed for extended periods of time with the cover on. Extended hi-speed pump operation will cause a slow heat build-up due to water friction, which could trip the spa’s hi-limit thermostat.

7.Don’t block or sit on the filter area.

8.Don’t allow horseplay or unsupervised use of your spa.

9.Don’t allow anyone to tamper or play with any of the safety or suction fittings of your spa.

 

About our factory

1.Productive Process for swimming spa

   (1)swimming spa material is imported from Aristech acrylic in USA

   (2)The mold of swim spa is standard

   (3)Experienced workers in dust-free plant

   (4)72 hours' test before packing the swimming spa

2.Method to pack the swimming spa
(1).firstly,use film to cover swimming spa surface
(2).secondly,make EPE wrap up spa
(3).thirdly,use foam to protect swimming spa frame
(4).then,use carton.
(5).at last,wooden crate could make spa safety enough

 

3.High quality accessories for swimming spa

    All our accessories of swim spa are standard and new,durable enough.

Thanks for visiting our swimming spa,waiting for your coming!