Front Rear Right Left Full around Parking View 4 Way Channel Car Cameras Image Combiner Video Switch Control Box

 

Description:

Video output: Two videos output, one for car monitor, the other for car DVR.

Front view camera power: supplied by control box system.

Rear view camera power: supplied by control box system, or could be supplied by reverse lamp power. 

Left/Right side view camera power: supplied by control box system

 

Functions:
1. Automatically rear view and front view: 

When you pull the reverse gear (Left/Right turning no triggered), the system will activate the monitor and rear view camera till the reverse gear back, 

then it will automatically switch to front view camera for 10 seconds then shut off.  

2. Manual switch control mode:

Front/Left/Right/Rear view could be controlled by Up/Left/Right/Down direction pulling the manual switch.

Pull the switch Up/Left/Right/Down, car monitor and corresponding camera will be working all the time, if no other trigger working. 

Then you could shut off the camera video by pulling the switch towards same direction again.

3. Side view mode:

When you turn on the turning switch, this system will activate Monitor and Side view camera (Left/Right side view camera is controlled by Left/Right steering lamp). 

The monitor and camera will turn off after 1.5 seconds when steer turning is finished.

Trigger priority:

Left View>Back View>Right View>Front View

 

 

 

Switch function:

 

Press for less than 1 second: Enter/Quit Side View mode

Press for 2seconds: Front View always working

Parameters:

The system working current: Max: 50MA. (Excludes working current of cameras)

The system working power: 9-30V. (Power supply to cameras is the same as the system input voltage, in 24V vehicle, please use 24V cameras)

System signal: PAL/NTSC/SECAM

Video output: 1.0VPP/75Ω

Working temperature: -20~80

Operation Temperature: -40~85 

 

 

Wiring Diagram 

Control 

Box Size

 

Package included