Excellent Performence:

• High sensitivity which could raise platemaking efficiency.
• Exquisite grains with excellent water-retaining property.   

• Good stability.

• Extensive adaptablit , could compatible with a broad range brands and types of platemakers, developing.

• Simple platemaking process, with low cost, high efficiency and low error rate.

• Type	POSITIVE PS PLATES(GREEN)
  Application Type	High quality long run color printing, newspaper printing and rotary press printing
  Plate Features	Multi layer grains, Seal  Pole process, smooth coating, high sensitive speed, excellent dot reappearance, large exposure and developing latitude, quick ink water balance, long  impression
  Plate Thickness	0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.40mm
  Maximum coil width	1350mm
  Spectral Sensitivity	320 - 450nm
  Exposure energy	30 seconds, approx. 20 pulses(3kw Lodine-Gallium lamp, from 1 m, UGRA PCW82 control strip, the third section un-inking)
  Developing Temperature	23 ± 2℃
  Developing time	20± 5 s
  Workable light	Under yellow light
  Resolution	2 - 98% at 200lpi
  Run Length	100,000 copies unbaked, 200,000 copies after baking (Actual run length may vary according to printing machine, ink, paper conditions)
  Shelf Life	18 months
  Storage conditions	The recommended storage conditions are 10 to 25℃,with 40% to 60% humidity Away from sunlight radiation & direct sunlight, Anti-humidity, Anti-acid & alkali

   

All the size can produced as your requirement with the thickness from 0.15mm-0.40mm in short delivery time. 

      Relying on the authentication of the ISO9001 international quality system,we adhere to the enterprise principle“superior quality,customers first”always we supply our clients high quality products and the most satisfactory technical service.