Information

Dimension and weight: 93.9mm*99.5mm*69.6mm, 0.48kg

External Diameter of Inlet/Outlet: 20mm(thread)

Head:0-15m

Flow rate: 0-1560L/H

Driving Mechanism: Brushless, magnetic separation

Life span: 30000hrs

Noise: ≤35dB(A)

Waterproof level: IP68

Max. working temperature: -30℃-100℃

Suitable medium: water, oil, normal acid/alkaline(tested needed for special liquid)

Speed adjustable(Optional): PWM/0-5V analog signal/potentiometer

Constant power output: For example, a 12V(24V) 10W pump uses 12-18V(24-30V), the power is still 10W, and it can run continously.

Application

Water heating, Intelligent toilet without water tank, and other need for pressurizing and circulating refrigeration equipment

1	Product model：	DC50E-12110PWM DC50E-12110VR DC50E-12110VS DC50E-12110S	DC50E-24150PWM DC50E-24150VR DC50E-24150VS DC50E-24150S	PWM:PWM speed regulation   VR:potentiometer speed regulation VS:0~5V Analog voltage signal speed regulation S:Fixed speed
2	Rated Voltage：	12V DC	24V DC
3	Working voltage range：	10-18V	10-30V	The pump can out put constant power when the voltage is higher than rated voltage.
4	Rated Current：	2.7A(4.5A)	2.1A(3.6A)	Closed outlet current(open outlet current)
5	Input Power：	32W(54W)	60W(83W)	Closed outlet power(open outlet power)
6	Max. Flow rate：	1320L/H	1560L/H	Open outlet flow
7	Max. Head：	11M	15M	Static lift
8	Min. power supply：	12V-2A	24V-2A

1	Jam protection	When jam it will Stop to protect itself
2	Dry run protection	The pump will Stop(8S) and start(2s) repeatedly to protect itself(can be customized)
3	Overloading protection	When the voltage exceeds the rated power, the pump will stop
4	Reverse protection	Wrong connection of the power supply(positive and negative), the water pump will stop running, and then re-connected, can work normally.
	Controller Internal install		Suitable for external installation
	Controller External install		Suitable for high temperature or Corrosive liquid submersible installation

Flow Rate Curve

Dimension

How To Choose A Right Pump For Your System?

1. Confirm your operating voltage, current, head, flow, and the size of inlet & outlet. In general, there is no flow when the head achieve the maximum head marked by factory. So if you require the pump is able to meet a certain height and also meet a certain flow, you should choose a higher maximum head than you need. Please consult us or refer to the performance curves.

2. Confirm the shape requirements, such as the type of interface, the direction of inlet & outlet, etc.

3. Confirm the working environment, such as the temperature, the medium, etc.

4. Confirm the functional requirements, such as the time control, the flow control, the speed control, etc.

5. Please feel free to contact us if you have any questions need our help during choose the pump.

6. We own our moulding factory, have the ability and capacity to open the mould, so if your system needs special model, we can provide ODM/OEM service for you.

And highly welcome OEM/ODM!

Installation

Note: The pump is not self-priming pump. When install it, please make sure there is enough water in pump body. Meanwhile, the pump must be installed below the liquid level in the tank.