|
Key Features
1. 1x RS232, 1x RS485 (Or RS422), 5x I/O.
2. Transparent data transfer, with built in standard TCP/IP stack.
3. Multi data centers (up to 5) and TCP server, able to access center with domain name and IP address.
4. TCP heartbeat link detection, keep device always online.
5. APN/VPDN
6. SMS backup, data will be transferred by SMS when TCP/UDP disconnects.
7. Rich online and offline trigger modes: SMB, Ring, Data (Sent through serial port).
8. Hardware and software auto inspection technology, enable operation fault auto repairing.
Interface
| Power Requirements |
| Standard Power |
DC 12V/0.5A |
| Power Range |
DC 5~35V |
| Communication Current |
<85Ma(12V) |
| Built-in power inverting protection and over voltage protection |
| Serial Port |
 |
 |
RS232, or RS485 (or RS422)
Industrial terminal block interface, ideal for industrial applications.
|
| Built in 15KV ESD protection, TTL GPIOs is customizable. |
| Serial Port Rate |
300~230400bits/s |
| Data Bit |
5, 6, 7, 8 bits |
| Stop Bit |
1, 1.5, 2 bits |
| Check |
No check, Even-parity Check, Odd Parity Check, SPACE and MARK check |
| Analog Quantity |
| 2x analog quantity input(10-bit AD, support 4-20mA current signal input, optional 0-5V voltage signal input) |
| I/O |
| 3x GPIOs, able to configured as input and output, communication level: 3.3V |
| Others |
| Indicators |
System, Power, Online, Act |
| Antenna |
Standard SMA female antenna interface, characteristic impedance 50Ω |
SIM/UIM Card Holder
 |
Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection |
| Environmental Limits |
| Operating Temperature: -35~+75ºC(-31~+167 ºF) |
Storage Temperature: -40~+80ºC(-40~+176 ºF) |
| Ambient Relative Humidity: 95%, non-condensing |
| Power Consumption |
| Communication |
<1W |
| Note: 12V(<85mA), 5V(<155mA) |
| Standby |
<0.4W |
| Note: 12V(<30mA), 5V(<55mA) |
| Sleep |
<0.1W |
| Note: 12V(<0.8mA), 5V(<18mA) |
| Anti-interference |
| Type |
Level |
Voltage/Current Waveform |
Value |
| Power Frequency Magnetic Field |
3 |
Continuous sine wave |
30A/m |
| Damped Oscillatory Magnetic Field |
3 |
Continuous sine wave |
30A/m |
| Pulse Magnetic Field |
3 |
Pulse |
100A/m |
| Radiated Electromagnetic Field |
3 |
80MHz~1000MHz Continuous-wave |
10V/m |
| Level 3, suitable for equipment installed in typical industrial environment: Plant, Power Plant, or residence area. |
| Protection Class |
| IP30, Housing and system are isolated safely, ideal for industrial automation application |
| Reliability |
| MTBF(mean time between failures): >10,000hrs |
| Ultra-low consumption design, includes sleep mode, scheduled online and offline mode |
| EMC up to level 3 |
| Use NTP technology, build-in RTC |
| SIM/UIM card port built-in 15KV ESD protection |
| Weights and Dimension |
| Dimension: 91x58.5x22 mm(3.58x2.30x0.87 inches ), Antenna and other accessories not included |
| Weight: 208g(0.46lbs) |
Order Information
| Model |
Description |
Cellular Band Options |
TD210-G
|
Industrial GPRS DTU |
Dual-band EGSM900/GSM1800MHz,
Quad-band GSM850/900/1800/1900MHz(Option)
Support GSM phase 2/2+, GPRS class 10, class 12(Option) |
TD210-C
|
Industrial CDMA DTU |
CDMA2000 1xRTT 800MHz
Dual-band 800/1900MHz(Option),
450MHz(Option) |
TD210-W
|
Industrial WCDMA DTU |
Tri-band UMTS/WCDMA/HSDPA
/HSUPA/HSPA+ 850/1900/2100MHz,
Quad-band 850/900/1900/2100MHz(Option),
Quad-band GSM850/900/1800/1900MHz,
GPRS/EDGE CLASS 12 |
TD210-T
|
Industrial TD-SCDMA DTU |
Dual-band TD-SCDMA/HSDPA
/HSUPA 1880-1920/2010-2025MHz,
Quad-band GSM850/900/1800/1900MHz, GPRS/EDGE CLASS 12 |
TD210-E
|
Industrial EVDO DTU |
CDMA2000 1X EVDO Rev A 800MHz,
Dual-band 800/1900MHz(Option),
450MHz (Option), Rev B 800/1900MHz supports IS-95 A/B and CDMA2000 1xRTT |
TD210-LT
|
Industrial LTE/TD-SCDMA DTU |
TD-LTE 2600/2300MHz
DC-HSPA+/HSPA+/HSUPA/HSDPA/
UMTS 2100/900MHz
GSM 850/900/1800/1900MHz |
TD210-LF
|
Industrial LTE/WCDMA DTU |
FDD-LTE 2600/2100/1800/900/800MHz,
700/1700/2100MHz(Option),
HSPA+/HSDPA/HSUPA/WCDMA/UMTS 900/2100MHz,
800/850/1900/2100MHz(Option),
EDGE/GPRS/GSM 850/900/1800/1900MHz
GPRS CLASS 10, EDGE CLASS 12 |
TD210-A
|
Industrial TDD/FDD DTU |
Support TD-LTE 2600/2300MHz
FDD-LTE 2600/2100/1800/900/800MHz,
TD-SCDMA, WCDMA, EVDO, CDMA, GPRS |
| Package Checklist |
1. TD210 DTU Host
2. Cellular antenna(SMA Male)
3. Power Adapter(12VDC/0.5A)
4. 3- Pin RS232 cable
5. 12-Pin Terminal Block |
Applications and Network Diagram
Dimension
|
