Technical Details

• Advised by MultiECUScan / FiatECUScan diagnostic software
• Compatible with ELM327 or KKL (VAG COM)
• 6 x 16 Pin OBD Cable Adapters
• See MultiECUScan / FiatEcuScan website for a full list of supported vehicles

Product Description

Introduction: 
Six OBD cable adapters to allow additional diagnostic options for Italian cars. These include ENGINE, ABS, POWER STEERING and CAN ECU's. 

Specification: 
Green Adapter Lead (MultiECUScan / FiatEcuScan Adapter 1) = Engine, ABS, Power Steering, (usually) 
Red Adapter Lead (MultiECUScan / FiatEcuScan Adapter 2) = Airbag, (usually) 
Yellow Adapter Lead (MultiECUScan / FiatEcuScan Adapter 3) = CAN, (usually) 
Purple Adapter Lead (MultiECUScan / FiatEcuScan Adapter 4) =Hood & newer models, (usually)  
Blue Adapter Lead (MultiECUScan / FiatEcuScan Adapter 5) = Newer models, (usually) 
Grey Adapter Lead (MultiECUScan / FiatEcuScan Adapter 6) = Newer models, (usually) 

Pin Configurations: 
Green Adapter Lead = Female pin 7 to male pins 1,7,9,12. 
Red Adapter Lead = Female pin 7 to male pin 3  
Yellow Adapter Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12  
Purple Adapter Lead = Female pin 7 to male pins 7,8,11,13  
Blue Adapter Lead = Female pin 6 to male pin 3 / Female pin 14 to male pin 11  
Grey Adapter Lead = Female pin 6 to male pin 12 / Female pin 14 to male pin 13 

Additional Items Required: 
An ELM327 or KKL (VAG COM) diagnostic cable to connect to these adapters. 
MultiECUScan / FiatEcuScan software (free or full version). 

Supported Vehicles: 
Please see the MultiECUScan / FiatEcuScan website for a full list of supported vehicles. 

Other Details: 
Cables fully tested on supported model before shipping. 
No responsibility can be accepted for any damage caused by the lead. 
Some models may require the full version of MultiECUScan / FiatEcuScan to communicate with some ECUs.