Ⅱ.Application

Sprayidea® 88 Embroidery Spray Adhesive is widely used in computer embroidery industry, it’s super quality can be used on children' wear, underwear, nylon or other thin fabric and white fabric.

Ⅲ.Feature

• Super viscosity: suitable for all kinds of different fabrics;
• The operation time is long, keep the viscosity in 30 minutes, ensure workers have plenty of time for operation, not need to repeat spray ;

•  Easy to use: only gently press the nozzle spray, no need brushing the glue;
• White-transparent glue, low permeability, low residue, yellowing resistance, particularly suitable for the material of higher requirements for glue, such as white paper, fabric paste;
• Environmental protection products:No formaldehyde, Freon, benzene etc., SGS tested.

Ⅳ.Instruction

• Please shake well before use.
• The distance of spraying to the adhesive surface is 20-30 cm.
• Paste the material on the surface after 15 seconds.
• After using please keep the can down, spray about 2 to 3 seconds to avoid nozzle clogged.
• If the nozzle clogged, use alcohol or other solvents to clean.

Ⅴ.Caution

• Pressurized packaging, explosion may happen in high temperature, keep space ventilation.
• Avoid close to heat, fire and avoid direct sunlight for a long time.
• Do not store at 49 ℃ above, recommended temperature is less than 30 ℃.
• Please keep the children away from it.
• When the adhesive contacted with skin or eyes, please clean with water, serious please go to the doctor immediately.
• The user's responsibility to determine whether the products suitable for the specific purpose when never use this product before. before use, it’s better test on the sample materials.