Low voltage bushings are designed comply with ABB's specification, for the use on distribution transformers with ANSI standards.
The bushings consist of a epoxy insulating body, conductor stud, internal connection spade and external connection spade, and a piece of clamp. On customer's request, we can also supply 1 piece of seal gasket.

Low voltage bushings passed strictly tested which are listed below:
1. Insulting dielectric tests:
Impulse voltage: for 1.2kV class the impulse voltage is 30kV, and for 2.5kV class, the impulse voltage is 45kV High voltage 50Hz & 60Hz withstand test: for 1.2kV class, test voltage is 10kV/1min., for 2.5kV class, the test voltage is 20 kV/ 1min.
2. Mechanical Strengthen Tests
Leakage test
Stud push‐out test
Stud torque strength test
Cantilevel test
Flange torque test
3. The environmental test

It includes thermal cycle test. The tested temperature range is ‐40~140ºC, withstand 20 cycles. We have the copies of test report for reference on customer's request