This oven is applicable to the baking of laboratory, chemical, pharmaceutical and various electronic products, epoxy resin crafts, electrical casting and baking of various magnetic accessories and metal materials, baking, drying, disinfection, heat treatment aging and other heating purposes within the specified temperature.

 Box structure

Inner box size: 500 * 500 * 500mm (width * height * depth);

Outer box size: 1150 * 1550 * 1050mm (width * height * depth), subject to the actual object;

The controller is located under the machine and the door opens from right to left;

The internal material is a combination of heat-resistant lightweight mullite bricks;

The outer material is SECC steel plate, powder baking paint, 1.2mm thick;

The insulation material is aluminum silicate fiberboard and glass fiber cotton, with the insulation thickness of 180mm;

With movable feet and fixed feet, it can be pushed and fixed at will;

II Temperature control system

Analytical accuracy ± 1 ℃;

The distribution uniformity in the box is ± 4.0 ℃;

Temperature range: normal temperature+100~1200 ℃ (common temperature 1100 ℃)

Heating time: about 15 minutes at normal temperature~100 ℃;

Heater: the heating material is silicon carbide rod, which is installed on the left, right and bottom sides of the box;

The temperature control is a PID microcomputer, which can automatically calculate, PV/SV display at the same time, and can set any temperature value between normal temperature and maximum temperature by pressing the key (Taisong, Taiwan);

Timer setting: A, 9.99 seconds - 999 hours (hours, minutes, seconds, Taiwan Yangming can be selected)

B. The heating current is cut off when the temperature reaches the time limit (alarm prompt);

Thermal induction CA (K) type (Taiwan Shenjie);

The current controller is SCR thyristor with high control accuracy;

Heating mode: thermal radiation convection, three-sided heating;

Security protection system

High temperature protection system: when the temperature is out of control due to external force, the system will automatically stop heating and power supply when the set temperature is 10 degrees higher, so as to protect the safety of your product and machine;

Overcurrent protection system: when the power of the whole machine exceeds the normal power due to high applied voltage or other reasons, the system will automatically power off to protect the industrial control components of the whole machine from damage.