ABM machine

Model:	1000-680
Brand:	CS
Origin:	Made In China
Category:	Construction & Decoration / Building Steel & Structure
Label:	ABM machine , construcion machine , arched panel machine
Price:	-
Min. Order:	1 set

Inquire Now

Product Description

1.Application:

This machine can be used for site working. Using this machinery can use in the construction of warehouses, workshops, hangars,
and also in the production of boats, vehicles, and highway guardrails, etc.
2.Introduction:
The equipment consists of two parts, one is forming part, another is arching part. Thee two parts are sit on a mobile frame
moving from here and there. Someone even call it mobile factory. We are the professional manufacture with 10 more years
since the beginnings in China. Not only sell equipments but also offer engineering service.
3.Advantages
If you are not familar with this system, please contact us to work out the best solution for you. The features of this Arching roof are:
(1).Self-support roof. There is no beams, columns or structure. The roof sheets are locked by a seaming machine.
(2). Cost save. This building doesn't requires a mount of screws and bolts. But the roofing system is secure enough for construction. The beautiful roof will attract your eyes.
(3). Labor save. Compared with traditional building, a small group will complete the Arching roof project in very shot time.
4. Main technical

Size: 9000mm×2250mm×2300mm
Total weight: About 15000KG
Material of bending leaf: Stainless Steel
Thickness of bending leaf: 12mm
Cutting Material: Cr12MoV, Heat treatment
Cutting type: Hydraulic / Mechanical controlling cutting
Total motor power: 18.5KW
Forming Power: 7.5KWB
ending Power: 4.0KW
Cutting Power: 4.0KW
Conical Power: 3.0KW
Material of rollers: 45# steel, quenched HRC 58-62
Material of shafts: 45# steel, adjusted
Step of rollers: 13
Applicable Span: 32m max.
Width of the Panel: Feeding width: 1000mm
Finished width: 680mm
The depth of the groove: 223mm
Operating factor of the panel: 68%
Thickness of the Panel: 0.8-1.5mm
Working Speed: Straight Sheet: 15m/min
Arch Sheet: 13m/minSeaming: 6m/min
Electric Standard: 380V / 50 HZ / 3 PHASES or according to your requirement
Controlling system: PLC

5.List of accessories

Name	Usage	Amount
Decoiler(core shaft and cradle)	Hold and feed the coils	1
Sewing machine	Assembling the sheets	1
Straight sheets cradle	Plate supporter	8
Arch sheets cradle	Plate supporter	8
Straight sheets side cradle	Plate supporter	8
Suspender	Lifting	3
Clamp(UNIQUE BIG TYPE)	Bait sheets	8
Manual Super pliers	Bait sheets	1
Driving chains	To roll the gears	3M
Chain half section	As spare	5
Chain whole section	As spare	3
Instruction book	To guide you how to use the machine	1
Switch	As spare	1
Length sensor	To control the length by manual	1
PLC	To control the length and quantities	1
Rolling cradle	To rise and fall the machine	2

We provide all the accessories for free.

Features of Changsheng k-span machine

1. All the rollers are forged from the high quality structural steel and are processed intensely. The surfaces of the rollers are plated with hard chromium. The rollers have a high hardness and long operating life.
2. The power set to automatically transport the colored steel sheet is equipped in the forming press section, which can press the colored steel sheet with the thickness of 0.8~1.6mm. It is not needed to frequently adjust the clearance between the pressing rolls when pressing the sheet with different thickness, which can make the sheet come out from machine normally without scuffing of the coating film of the sheet. Being just like a “foolproof camera”, the operation of the machine is very simple. But the quality of the finished product can be guaranteed.
3. The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument. The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet, which makes the operation simple and guarantees the quality and the dimensional precision.
4. The hoisting tool is light and handy (The weight of hoisting tool of the United States is 30KG. And the weight of hoisting tool of our company is 2KG). It is convenient to install and uninstall the hoisting tool. Its hoisting speed is quick.
The joining type of the roof is self-lock, which makes it easy to install and safe with excellent water proof and storm resistance. The curving roof can directly be produced on worksite, effectively lowering the cost. The product is widely used on large-scale and mid-scale industrial construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre and so on.

Since we also do steel-structure buildings/projects home and abroad, and we also use our own machines, so we can give you complete technique support for machines and projects, like designing the project, making drawings etc.

There are mainly 15 types of K-span machines in my factory based on different span and feeding width distance and we can also design other dimension according to your requirements.

The types of our K-span machine

TYPE	Width of the coil	Width of the formed sheet	Thickness of the coil	Proper span
CS-600-305	600 mm	305mm	0.8-1.5 mm	≤24m
CS-914-400	914mm	400mm	0.8-1.5 mm	≤40m
CS-914-610	914 mm	610 mm	0.8-1.5 mm	≤38m
CS-914-650	914 mm	650 mm	0.8-1.5 mm	≤28m
CS-914-700	914 mm	700 mm	0.8-1.5 mm	≤24m
CS-914-750	914 mm	750 mm	0.8-1.5 mm	≤15m
CS-1000-400	1000mm	610mm	0.8-1.5mm	≤40m
CS-1000-550	1000mm	610mm	0.8-1.5mm	≤30m
CS- 1000-610	1000mm	610mm	0.8-1.5mm	≤39m
CS-1000-680	1000mm	680mm	0.8-1.5mm	≤32m
CS-1000-700	1000mm	700mm	0.8-1.5mm	≤28m
CS-1000-750	1000 mm	750 mm	0.8-1.5 mm	≤25m
CS-1000-800	1000 mm	800 mm	0.8-1.5 mm	≤14m
CS-1220-800	1250 mm	800 mm	0.8-1.5 mm	≤42m
CS-1250-800	1250 mm	800 mm	0.8-1.5 mm	≤42m