Manufacturable bags types, specification and speed：
Three sides sealing bag       L:  50-1600mm；W:  85-600mm
Production Capacity：30-130 pcs/min           
Stand-up bag         L:  180-550mm；W:  85-500mm
Production Capacity：：30-100 pcs/min            
Vacuumizing bag with valve       L:  180-550mm；W:  85-300mm
Production Capacity：：20-400 pcs/min           
(Due to the bag type, specification, materials, etc. reasons, the actual working speed will be different)
Needed Power Configuration：
1. Film conveying traction driven by AC servo motor：   1.3KW  × 3 =  3.9KW
2. Up & down sealing driven by Frequency conversion motor：   3KW  × 1 =  3KW
3. Unwinding traction motor：       0.75 KW × 1 =  0.75 KW
4. Side sealing configuration：           2KW  × 4 groups =  8KW(220V)
5. Horizontal heat sealing configuration：      2KW × 6 groups =  12KW(220V)
6. Zipper heat sealing configuration：       2KW ×2 groups  =  4 KW(220V)
7. Auxiliary material tration motor：       0.55 KW × 1 =  0.55KW
8. Control system and others：     About 1KW
Total Electricity consuming：          About 34KW (Triphase AC380V )
9. Air pressure：            0.6Mpa（6KWfcm2）
10. Cooling water：            About 15L/ min
11. The Machine Volume：      About 12.5m × 1.8m × 1.8m
12. The Machine total weight：      About 6T
Drive method：
1. Film delivery traction: Driven by AC servo motor
2. Up & down sealing: Driven by Frequency conversion motor

Control system：
1. The length, temperature and acceleration are set by the computer.
2. With double photoelectric trackings
3. Six times conveying
4. High-order stop function
5. If the raw material goes to skew, the magic eye will track it out and stop the machine automatically.
6. The normal punching and the even punching
7. Counter
8. Correcting the skews are adjusted by one photoelectricity
9. It will alarm if the system has faults
The source of Power：
The main motor was driven by frequency conversion motor, the can change through setting the acceleration. The traction motor is driven by the servo motor and it can set the traction speed to ensure the traction steadily and efficiently.
The lastest Function：
1. Advanced auto-stop funtion for the finished raw material and the temperature will be felt 5%-10%. When the machine is driven again, it will rise automatically.
2. It will alarm when it stop feeding or run out of the material.
The materials species can be processed：
BOPP/CPP ; BOPP/CPE ; BOPP/PET/PE ; BOPP/PET/CPP ; PET/PE ; PET/CPP ; PET/AL/PE ; PET/AL/NY/PE ; NY/PE ; PET/PAPER/AL/PE of composite material and so on.