ZX-2000C motherboard repair machine

Features:

1. Embedded Windows system, PLC user interface control, optical alignment system, display 8 temperature profile at the same time;

2. Can save and print temperature profile, contrast and analysis temperature;

3. HD color optical alignment system, optical zoom up to 22 times;

4. When welding,with CCD camera to monitor the melting process of solder ball;

5. Auto alignment, mounting, welding and removal and recycle BGA after remove;

6. Upper heater with hot air, bottom with hot air and IR to preheat;

7. Three independent heater with 9 segment temperature up(down)+9 segment constant control, can store N groups temperature profile;

8. Bottom heater with supporter to prevent PCB deformation;

9. Reserved Nitrogen interface, rework process in the protection of Nitrogen;

10. After removal and welding, with cooling fan to cool PCB board, ensure welding effect;

11. Equipped with various size of hot air nozzle, heater can 360 degree rotation, easy to replace.

12. Build-in vacuum pump, no need gas sources.





SPECIFICATION

PCB Size
≤L750×W700mm

PCB Thickness
0.1~5mm

Fine-tuning accuracy
0.01mm

Angle fine-tuning
360°

Temperature Control
(K Sensor)(Closed loop)

PCB Positioning
(Outer)

Sub (Bottom) heater
(Infrared)4200W

Main (Top) heater
(Hot air) 800W+800W

Power supply
(Single phase)220V,50/60Hz,5.8KVA

Machine dimension
L1500×W910×H1600mm

Weight of machine
(Approx.)260kgs