Home > Products > Electronics & Electricity > Electric Control System

 Saimo feeder controller has two types of 6001 and 6000B type, Respectively, said the big screen and small screen, 6 handle the load cell weight signal and the belt speed signal to calculate the flow of materials and the cumulative amount of flow shown in the instrument . While providing remote pulse count output and flow current signal output. The communication board can communicate with the host computer using RS-232 or RS-485 interface.

The instrument interface is intuitive and easy to use. And has a variety of automatic detection function, user calibration and maintenance.

Environmental parameters

1, Indoor / outdoor installation location should be close to the load cell, pay attention to dust, moisture.

2, storage temperature -40 ℃ - +70 ℃

3, the operating temperature -10 ℃ - +50 ℃

4, the maximum relative humidity: 95%

power supply

1,220 VAC ± 10% 50 Hz

2, the fuse 0.5A

3, EMI / RFI filter

Weighing sensors

1, the instrument provides 10VDC ± 10%, 200mA excitation power can be connected in parallel 4 load cell

2, sensitivity, 0.5mV / V-3.5mV / V

3, the maximum 3mV input signal 3

4, load cell shielding ground

5, the cable distance greater than 60 meters (not more than 900 meters), the use of excitation compensation circuit

6, jumper select local or remote compensation

Motherboard digital input port

Instrument board provides three programmable input ports, receiving dry contact switch signal.

Motherboard digital output port

Instrument board provides three programmable output port, transistor on-off signal.

Communication board

Instrument can be installed communication board, you can use the standard RS-232, RS-485 serial interface to communicate with the host computer, instrument data acquisition and operation of the instrument.

The screen size

6001B for the big screen, 6001B for the small screen

Installation

6001P, 6001BP Panel Mount (Mosaic)

6001F, 6001BF On-site installation (wall-mounted)

Saimo feeder controller has two types of 6105 and 6105B type. 6105 is based on 32-bit microprocessor control, the display uses 320X240 dot matrix LCD large screen display. 6105B is based on CPU with 8-bit microprocessor, 128X64 dot matrix display with liquid crystal display.

Main features and features:

● Digital Instrumentation: provide accurate, drift-free performance; 
● automatic zero adjustment: through a simple operation, the instrument will automatically calculate and establish a new zero: 
● Automatic calibration: to provide users hang code calibration chain code calibration, electronic calibration and a variety of physical calibration automatic calibration mode; 
● zero tracking: the system can automatically zero tracking; 
● programmable features: programmable Instrumentation input and output ports to meet the requirements of different users; 
● filter choices: filter time is adjustable; 
● zero dead zone: eliminate the dead zone by setting zero interference small flow; 
● speed input options: choose both internal and external speed input; 
● enter password: protection parameters to prevent human modification; 
● fault self-diagnosis: can Multi-channel load cell failure to self-diagnosis

Instrument parameters:

● Enclosure 
Panel Mount: Dimensions: 299 x 154 x 203mm 
Opening size: 142 X 287mm 
● Temperature 
Operating temperature: -10 ~ 50 ℃ 
Storage Temperature: -40-701C 
● power supply: 220VAC, 50Hz 
● digital signal input / output: 
Three-way programmable digital input the instrument accepts input from a variety of switching equipment; 
four programmable digital output (relay, passive contact) signal is used to provide a variety of information or trigger a variety of auxiliary equipment; 
● speed input: single speed pulse input from the speed sensor: 
● analog input / output: 
Input: load cell millivolt signal; 
Output: one for standard 0-20mA or 4-20mA current output flow; 
● control: way PID regulator control output; 
● communication: optional RS232 or RS485 communication interface, PROFIBUS fieldbus interface (for increased input / output interfaces and other communication, please contact with the factory.).

IRCULATION CHAIN CODE CONTROLLER6008B

 ● Enclouse:: 

Field-mount: Dimensions: 312 x 380 x 150 mm 
Mounting hole dimensions: 240 x 450 mm 
Panel mount: the opening size: 140 x 284 mm 
Dimensions: 288 x 144 x 185 mm (depth) 
● Power : 220VAC, 50HZ 
● precision / non-linear: the weight of the load from 0% to 105% of full load, the error is less than% 0.02 
● digital signal input / output: 
three-way programmable digital input the instrument accepts a variety of devices from opening Differential input. 
Four programmable digital output signals are used to provide a variety of information or trigger a variety of auxiliary equipment. 
● Communication: RS232 or RS485 communication interface 
● Temperature: 
Operating temperature: -10 to 50 ℃ 
Storage temperature: -40 deg.] C to 70 
● Status Indicator: zero, span, alarm, batch weighing, five preparatory work status indicator 
● Memory: Non-volatile RAM with built-in lithium battery. 
● Electronic circuit: 8-bit main processor, 16-bit analog-digital processor, to prevent the system crash watchdog circuit. 
● Shipping Weight: field-mount: 13 kg Panel Mount: 8 kg 
● Analog Input / Output: 
Input: millivolt signal for the sensor. 
Output: Standard 0-20mA or 4-20mA current output for flow