Home > Products > Industrial Supplies > Other Industrial Supplies

TPJ-800 automatic high pressure machine adopts the heating tube heating and open the door manually and automatically locking mode, mainly used in the LCD module production line, the polarizer and LCD glass, ITO film and glass process is completed, the polarizer correction with bubbles, remove the liquid crystal panel memory bubble producing apparatus. Use of pressure and temperature polarizer removal lamination bubbles, this process will enhance the bonding force between different materials. Can also be used for CELL liquid crystal box vacuum deaeration process.

PLC equipment used for action sequence control, temperature, pressure and time of operation operation adopts the form of intelligent process control. Compact structure, small occupation area, reliable and unique interlocking safety device, multiple fortification, ensure that the charging and discharging speed, switch door safety, the whole device has the advantages of reasonable structure, high degree of automation, reliable operation, convenient operation, high efficiency.

Performance characteristics of

Effects of anti Wen Chao pressure, flow and other protection

Adopting the natural cooling

The two method of operation ( hand / Auto selector )

Effects of temperature / pressure synchronous, first after heating, pressurizing heating pressurized to three kinds of processing technology

May according to the process requirements, adjust the pressure of time ( 0 ~ 60 minutes), open the door and delay period ( 0 ~ 10 seconds );

The configuration of high precision air filter

The famous PLC, HMI control system, various parameters curve display, convenient operation

Effects of pressure, temperature, mechanical and electrical safety protection structure

Product technical parameters

The device according to the products produced by the process requirements, should be installed in a clean workshop. Prepare 380V ( + 10%) 50HZ three-phase five wire power supply and ground and above the 0.7Mpa clean compressed air handling equipment, installation. Should be stable. The equipment shall be stored in clean, dry room, air relative humidity of not more than 75%.

Project

Specifications

The size of the equipment ( W * D * H )

1310 * 2150 * 1700 ( high excluding alarm lamp height)

Overall structure

Stainless steel / stainless steel plate surrounded by a steel structure

Pressure indicator

1 ( tank pressure )

Uniform heat dissipation device

Wind leaf + magnetic driver

Control mode

PLC action sequence control

The way of control

PID adjustable output

Temperature range

Room temperature to 100 DEG C temperature: < 85 C

Temperature overshoot

< 3 C

Temperature accuracy

2 DEG C.

Temperature uniformity

2 DEG C.

Time range

0 ~ 999h time adjustable

Thermocouple

Type K

Tank liner material

SUS304 rust-proof material

Effective vessel ( mm )

800 * 1200 0.73m3

Tank pressure design

1.0Mpa

Heating mode

Heating tube heating

Way of working

Temperature / pressure synchronous, heated and pressurized first, first pressure heating

Alarm mode

The buzzer and indicator light

Heating power

6KW

Power supply

380VAC, three phase five wire;

Total weight

About 1300KG