Product Description
General Technical Information
1) Production range: DN75MM-DN1000MM
2) Material: 21CrMo10
Chemical Composition
C
|
Si
|
Mn
|
P
|
S
|
Cr
|
Mo
|
Cu
|
0.16~0.23
|
0.20~0.40
|
0.20~0.40
|
≤0.015
|
≤0.009
|
2.20~2.60
|
0.30~0.50
|
≤0.20
|
3)Mechanical Properties
Tensile Strength σb Mpa
|
Yield Strength
σs Mpa
|
Elongation
δ %
|
Reduction Area ψ %
|
750~850
|
≥650
|
≥16
|
≥60
|
4) Ultrasonic Test
The forging of the mould will be ultrasonically tested as per JB/T1581-1996 or equivalent standard, details as follows:
A Without bursts, crack, shrinking hole and other defects.
B The defect with size within ¢2mm can be ignored.
C Individual defect with diameter of φ2~φ4mm is permitted, and the distance of the neighboring defects should be more than the 10 times of the bigger one’s. For 100cm2’ s area, the quantities of the defects with diameter of φ2~φ4mm should not exceed 3.
D There should not have compact district.
5) Other items
Finish: Ra1.6
Accuracy: 0.1mm
Concentricity: 1.1-1.9mm
Draft Taper: 0-0.9mm
Hardness: HB 230-270
6) P.S.
If the user has different requirements, please give us your requirements in detail along with inquiry.
Product Image
Img 1
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,