Moisture Meter (ppm of water)
Product Description
Application:
EE36 Series Moisture Meter is specially designed for measuring the water content in the oil. It online test water conent in the lubricants and insulating oils, to ensure the normal operation of equipments and machineries ideally. For example, the moisture can affect the insulation characteristics of transformer oilseriously, therefore, continuous testing of transformer oil is very important.
Installation:
Designed for online monitoring, sensor probe can be placed directly into the oil and can withstand the maximum pressure of 10bar. By means of ball valve installation device, the probe can be easily and directly installed and took down, and these works will not interrupt the normal operation of the system.
Calibration:
Calibration of the EE36, user can use two buttons on the circuit board to complete, and also can configure the software to complete, very convenient. The software will be offered along with the meter. The software can be used to modify the analog output signal and set the alarm point, can also be used for calibration and replacement of its sensitive components or the entire sensor probe. All these operations are very simple.
Features:
1. measure the water activity aw and temperature T. even at the maximum pressure of 10bar.
2. measure the water content (ppm) in transformer oil.
3. free to set two-channel analog signal output.
4. the length of probe cable can be upto 10 metres.
5. online calibrate the outputs of water activity aw and temperature T.
6. LED displays the status of operation and sensor probe.
7. RS232 serial interface.
8. configure software.
Payment Terms: | TT/LC/DP/DA |
| |
Product Image
Img 1
Img 2
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,