Series: Hand & Motor Driven
Type: Bowl Hand & Motor Driven Clear Top (19”*480mm)
Model No.: MK-TR-HM19
Dimension: 19” (480*480mm)
Origin: China
Scope of application: Separating protruding leaves and twigs, harvest leaves or petals, etc.
Packing: Neutral Packing / Customized Packing
Brief Introduction:
The bowl hand-driven
leaf trimmer (
trimmer machine) is for small or medium sized projects. It is used for separating protruding leaves and cutting twigs from a variety of plants and flowers. They can also be used to cut plants and bushes like rosemary, oregano, basil, mint, lavender, coriander, parsley, and to prepare essential oils and mixed flowers for aromatherapy and potpourri. With just a few turns of the handle, trimming is energy saving and high efficiency.
Superior Features:
1. Beautiful bowl shape
2. Lightweight and portable
3. Long lasting materials (stainless steel and plastic)
4. Equipped with a powerful, efficient and quiet motor
5. With inverted rubber twist spin blades
6. With an AC adapter and cables
7. Transparent plastic enabling to look through the trimming process
8. Easy to use and clean after use
9. Fast and efficient cutting
10. Easily accessible for periodic maintenance
11. Combine features of hand-driven and motor driven trimmers
Operating Instruction:
Remove the
leaf trimmer top from the base. The inside of the
leaf trimmer (
trimmer machine) top contains the high-density rubber tonguesthat are used to push the plant leaves into the blade grill. The cutting blades or wires are located below the grill.
2. Place the untrimmed plants on the grill
Place the untrimmed plants on top of the
leaf trimmer (
trimmer machine) grill. The plants should be many to make sure the grill surface is covered (approximately 40 dry grams).
4. Connect the electric adaptor and turn on
Connect the electric adaptor and push the on/off button on the base of the
leaf trimmer (
trimmer machine). Then the inside rubber tongues will twist and multiplies the rate of the spinning plants and blades by over 30 times one round. Adjust the speed frequency by turning the knob. Turn further right, faster.
A combination of the rubber tongues presses and rolls the plants into the spinning blades can improve the cutting efficiency.
Depending on the type of plants, the trimming can be used for the preparation of plants’ essential oils.
6. Repeat the process for more harvest
If you think the leave pieces are not small enough, keep repeating the above process as many times as you want, or until you have completed your harvest. When finished, easy clean every part of the
leaf trimmer (
trimmer machine)and store it.
7. Refer to Step 1 when trim manually
If you want to trim plants manually, first refer to Step 1, remove the
leaf trimmer (
trimmer machine) top. Attention: take out the CONNECTOR. Next refer to Step 2 and 3. Handle is a must, so place the handle on the
leaf trimmer (
trimmer machine)top. Then turn the handle clockwise to make 15-30 complete rounds. Only 30 seconds can yield one hour’s work. Finally you can refer to Step 5 and 6.
Maker Lighting Company Limited