Home > Products > Consumer Electronics & Lighting > Commerce & Finance Electronics > Other Commerce Electronics

Touch internet Kiosk
This kiosk is designed as a payment terminal & self service terminal. You are able to make an order and finish it via this machine. It could be installed at Metro station, film hall, train station, airport hall, shopping mall and other public places. There are two holes in the front bottom, so you can fix it into the floor to escape moving it.

Internet kiosks equipped with card readers and thermal printers are designed to provide self-service capabilities in various public settings. These kiosks are typically found in locations such as airports, shopping malls, train stations, and other high-traffic areas where users can perform transactions, access information, or print documents without the need for human assistance.

Key features of such kiosks include:

• Durable Construction: Built to withstand constant use and potential environmental factors, especially for outdoor models like the Smart6500 series .
• Card Reader: Facilitates transactions and identity verification through magnetic stripe, IC, or RFID card reading capabilities.

This kiosk including:
1)19.1 inch Touch Panel, usually with Infrared touch panel 
2)19.1 inch Grade A+ TFT LED monitor
3)Powerful Embedded Computer Host
4)19.1 inch durable payment LED kiosk cabinet  
5)Normal plastic keyboard with mouse
6)Operate system, Internet access
7)a safty packaged set, including foam, sponge, carton box and wooden case. Note: the above components could be order seperately, you are welcome to order monitor only, or cabinet only. More information, please feeel free to contact me. 

Specification:
1. Monitor: Grade A+ LED monitor without any dot.  
100%  new monitors
Resolution: 1280x1024(for 19'')
Contrast: 1000:1
lightness: 300cd/m2
Rato: 4:3 or 16:9
17''monitor and 22'' monitor are available.
2. Touch panel: 5 wire resistive or Infrared
Resolution: 4096x4096
Hardness: Mohs'7
Transmission: about 92%
Hitting life: more than 500,000,00 cycle times
Erro devitation: about 1%
SAW and Capactive touch panel are availble. While it is a little difficult to maintain SAW kiosk and Capactive touch panel is much more expensive.
3. PC host: Industrial motherboard, 4GB ram, 120GB HDD, Intel J1900 CPU, Cold fan, P4 Power supply and 2 loader wpeaker.
In order to make you maintain the PC host easily, we provide you a special steel case for it.
4. Kiosk Frame: 1.5mm CRS frame with carpaint.
Additional devices:
a. Thermal printer, 80mm width paper, auto cut
Normally we use Epson 532 thermal printer, you could also choose any thermal
printer you like, please kindly provide me the brand&model you like, I will do other thing for you.
b. RFID card reader/Non touch card reader
5.The following devices are available:
a. Digital camera, web camera
b. Wifi, 3G modem, GPRS, Bluetooth connection
c. Digital keyboard(pinpad)with 16 keys
d. Finger printer reader, QR code reader, Barcode scanner
e. UPS(10~20mins)for power supplyTo this payment kiosk, 17.1''19.1''22''...are available.  
Test process:
Before we send the kiosk to you, in order to make sure the kiosk run well after you get it, we will test to run it with not less than 24 hours for each kiosk.
Delivery method:
1. To most of the countries, if you are not so emergency, we s est you choose ocean ship. The cost will be best.
2. If you are emergency, you can choose Express or airfreight. For express, there are DHL, Fedex, UPS, SAL and EMS to choose. Among of them, SAL and EMS will be a little cheaper than others. If by air fly, you need pick the goods up from the airport.
3. For Ocean ship, please kindly provide the nearest port to your city, so we can get a detail shipping cost for you.
Payterms: We accept TT, Western Union, LC(above 30, 000 usd), Escrow.
Usually 50% of the total payment as deposit.
To get more detail information, please kindly contact us freely, :)