high TG hasl single sided PCB board
Product Description
1.high TG hasl single sided PCB board
2.7 years experience in pcb
3.Drill Size:0.1mm pcb
4.Stable quality with suitable price
high TG HASL single sided PCB board
More information:
PCBs Special Offers :
Offering "one-stop shopping" service
Can provideassembly service and component sourcing,Including Surface Mount and Conventional.
Can Supply Laser Cut Solder Paste Stencils for use in your Surface Mount Build.
Minimum Hole Position Tolerance |
±0.075mm |
Hole Size Tolerance |
±0.075mm(PTH) |
±0.05mm (NPTH) |
Outline Dimension Tolerance |
±0.13mm |
Conductor Width Tolerance |
±0.05mm or ±20% of Original Artwork |
Warp & Twist Ratio |
0.70% |
Insulation Resistance For E/T test |
10K Ω-20M Ω |
Conductivity Resistance For E/T test |
<50 Ω |
Voltage For E/T test |
300v maximum |
Minimum Spacing Between hole edge and Circuit Pattern |
0.2mm(PTH) |
0.13mm(NPTH) |
Registration Tolerance Front/Back Image |
0.075mm |
Layer to Layer Registration |
0.075mm |
Board Thickness Tolerance |
±8%(t≥1.0mm) |
±10%(t<1.0mm) |
Aspect Ratio |
8:01 |
Pl ing hole Diameter with solder mask |
0.20mm-0.60mm |
Minimum Solder dam Width |
0.1mm |
Minimum Solder Mask Clearance |
0.05mm |
Solder Mask Type/Silkscreen Ink |
LPI(green, white, black ,red ,etc) |
Impedance Control tolerance |
±10% |
Minimum Board thickness for V-Groove process |
0.6mm |
Remained Board thickness for V-Groove process |
0.3mm |
Thickness Tolerance for V-Groove process |
±0.1mm |
Minimum Spacing From V-Groove to Conductor |
0.4mm |
Slot Dimension Tolerance(Length/Width),Length>=2*Width |
±0.125mm/±0.1mm |
Au thickness |
0.0762um-0.762um(Hard Au) |
0.0254um-0.127um(Soft Au) |
Ni thickness |
2.032-7.362um |
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,