Home > Products > Electronics & Electricity > Other Electrical & Electronic

2.      Maximum size: 300mm×300mm;

3.      Working mode: 2.5 D double-sided processing mode;

4.      Control handle is made up of ARM + FPGA of embedded control system, there is double USB interface in control handle, realizing master-slave USB communication model, that is, as the main USB device, directly read U disk data, as the slave USB device, communicate with the computer, which can completely work off the computer;

5.      All module driving mode, three step motor modules + driving chip united to drive XYZ axis moving;

6.      Casting fuselage, Y axis moves driving beam arm move, in sculpture and drilling process, no displacement of circuit board;

7.      Random configuration of processing data auxiliary processing software, data directly into the machine without any external software;

8.      With function of X, Y, Z axis hardware and software limit;

9.      High power spindle motor, higher processing precision, with memory function without electricity, no worries about outage;

10.    Handle human-computer interface: 128 * 64 dot matrix liquid crystal display + 18 multi-function keys, with simple and intuitive operation;

11.    Processing precision: ±0.01mm;

12.    Repeat precision: 0.01mm;

13.    Suitable drilling flower: 0.3mm~3mm  Drilling handle: 3.175mm;

14.    Suitable milling cutter: 1MM~3MM  Cutter handle: 3.175MM;

15.    Processing speed: 0~3m/min(actual-time adjustable);

16.    Spindle motor: 800W frequency conversion motor The highest speed 60000 revolves/min;

17.    Step motor: 35W four phase step motor*3;

18.    Shaft driving mode: entire advanced screw driving;

19.    Spindle movements itinerary: 60mm;

20.    Self-contained mating PC control software, lifetime free upgrades;

21.    Working power: AC220V/50Hz 1000W;

22.    Overall dimension: main engine: length 620mm×width 750mm×height 500mm;

control cabinet: length 200mm×width 300mm×height 550mm;

23.    Net weight: 80KG.