PP/PE plastic geogrid machine
The plastic geogrid is a kind of new geo-synthetics material, which is used widely in the engineering fields of water-conservancy, highway, railway, coal mining, and architecture, etc. Such as it is used to build and protect the dam and reinforce the roadbed of the expressway and railway, it is also used as the flood prevention net, dust-block and wall-protection net, and the mine top net, etc.
Structure features
◆According to the national regulation, the machine noise≤80dB
◆The production line is made up of four parts: plate-making part,
hole-punching part, longitudinal stretching part, transversal stretching
part. Electric control of all parts is operated on the touch screen,
which can read the datum and realize the remote control, convenient,
accurate, and reliable
★Plate-making part: domestic brand extruder, import controller and temperature control meter; three-roller transmits independently, and adopts reducer connected directly with SEW or HANSEN inverter, the transmission is steady, precision is high, it is also equipped with automatic gauge meter and trimmer, automatic fix length cutter device.
★Hole-punching part: it adopts hydraulic (or mechanic)
transmission device to punch the holes, import servo step motor to feed the plate, which ensures the device runs steadily, the punching
precision is high, low noise and easy for operation.
★Longitudinal stretching part: it adopts several hot stretching rollers, which ensures the uniformity and quality of the plate. The heat source is heat conductive oil, the temperature is adjusted automatically by import temperature control meter and pneumatic membrane adjusting valve. The longitudinal stretched
product is conveyed to transversal stretching device after preheating, forming and haul-off.
★Transversal stretching part: the longitudinal product is heated by the hot air generated from the heat exchanger heated by the hot oil, the final bi-oriented geogrid product is got after preheating, forming and haul-off. It adopts foreign advanced rolling clamp, which could reduce the friction, improve the efficiency, and prolong the service life of the device.
| Technical parameter and Specification |
Specification
Technical parameter |
Uniaxial product
|
Biaxial product
|
|
Width
|
2～3m
|
4～6m
|
|
Production capacity
|
2500～3500 t/a
|
|
Power capacity
|
500~1200kW(excludes oil boiler)
|
|
Outside dimension
|
(50~100)×8×6m
|
|
