| Model: | - |
|---|---|
| Brand: | Xinhai |
| Origin: | Made In China |
| Category: | Industrial Supplies / Mining Machine |
| Label: | laboratory ball mill , lab ball mill , ball mill |
| Price: |
-
|
| Min. Order: | 1 set |
| Last Online:08 Mar, 2016 |
1.Large ratio of reduction, uniform composition of particle size
2.Convenient adjustment, can meet many crushing requirements of test and mineral separation
3.Convenient receiving, less dust
Large ratio of reduction, uniform composition of particle size; Convenient adjustment, can meet many crushing requirements of test and mineral separation; Convenient receiving, less dust
Laboratory jaw crusher is a new product that mainly used for primary crushing of mine ore, coal, construction, metallurgy, glass, ceramics, chemical raw materials industry. It can be used for crushing various of hardness of materials.
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw, and the stuff will be crushed in multiple ways. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of jaw crusher moves away from fixed jaw by the pulling force of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.
| model | Capacity
(t/h) |
Size of feed opening (mm) | Size of feed opening
(mm) |
Max feed particle size (mm) | Discharging particle size
(mm) |
Speed of mainshaft (r.p.m) | Motor model | Motor power
(kw) |
Motor voltage
(V) |
Overall dimension
(mm) (L× W×H) |
Weight of main body
(kg) |
Motor weight
(kg) |
| XPC100×
60 |
0.2～0.4 | 100 | 60 | 45 | 6～10 | 650 | Y90L-4 | 1.5 | 220,
380 |
355×330×378 | 75 | 27 |
| XPC150× 100 | 0.4～1.8 | 150 | 100 | 90 | 5～25 | 380 | Y90L-2 | 2.2 | 615×432×520 | 190 | 25 | |
| XPC150×
125 |
0.3～2 | 125 | 100 | 5～30 | 375 | Y100L1-4 | 3 | 800×610×750 | 417 | 34 | ||
| XPC200×
150 |
1.5～2 | 200 | 150 | 140 | 6～38 | Y132S-4 | 5.5 | 1950×600×1150 | 691 | 68 |
1.Good sealing, no pollution
2.Low noise and consumption
3.Simple and convenient, reliable work, easy to clean
4.Strong ability to adapt the working conditions
Good sealing, no pollution, low noise; Low consumption, simple and convenient, reliable work, easy to clean; Strong ability to adapt the working conditions. Both dry and wet grinding can be available, it can a variety of hard materials, can do coarse, fine grinding or applied to the mixture of materials
Can be widely used in ore, coal, construction, metallurgy, glass, ceramics, pharmaceutical, chemical, metal and other scientific research departments and plants of the powder manufacturing
The two ends of the barrel are equipped with a hollow shaft end cover, the end cover of the shaft is supported on the bearing, and the ball mill rotates through the motor that installed in the cylinder. The barrel is provided with a grinding medium and grinding ore, the total feeding capacity is 25 - 45% of the effective volume. When the cylinder rotating around a horizontal axis according to the prescribed speed, the grinding medium and the ore in the cylinder will be elevated to a height under the pressure friction and centrifugal force, and then falling from the cylinder wall, then the ore is crushed by the shock and grinding. Ore from one end of the cylinder of the hollow shaft neck continue to be discharged, and later by the other end of the cylinder body of the hollow shaft neck continue to discharge; the ore keep moving under the feeding pressure.
| Model | Diameter of the rod mill cylinder(mm) | Number of the cylinder | Rotating speed of the cylinder
(r.p.m) |
Motor model | Motor power (kw) | Rotating speed of the motor
(r.p.m) |
Weight
(kg) |
| MBS0.159×0.3×4 | φ159 | 4 | 89.8 | Y90S-6 | 0.75 | 910 | 173 |
1.Good sealing, no pollution, low noise
2.Low consumption, simple and convenient, reliable work, easy to clean
3.Strong ability to adapt the working conditions
Good sealing, no pollution, low noise; Low consumption, simple and convenient, reliable work, easy to clean; Strong ability to adapt the working conditions. Both dry and wet grinding can be available, it can a variety of hard materials, can do coarse, fine grinding or applied to the mixture of materials;
Can be widely used in ore, coal, construction, metallurgy, glass, ceramics, pharmaceutical, chemical, metal and other scientific research departments and plants of the powder manufacturing
The two ends of the barrel are equipped with a hollow shaft end cover, the end cover of the shaft is supported on the bearing, and the ball mill rotates through the motor that installed in the cylinder. The barrel is provided with a grinding medium and grinding ore, the total feeding capacity is 25 - 45% of the effective volume. When the cylinder rotating around a horizontal axis according to the prescribed speed, the grinding medium and the ore in the cylinder will be elevated to a height under the pressure friction and centrifugal force, and then falling from the cylinder wall, then the ore is crushed by the shock and grinding. Ore from one end of the cylinder of the hollow shaft neck continue to be discharged, and later by the other end of the cylinder body of the hollow shaft neck continue to discharge; the ore keep moving under the feeding pressure.
| model | Cylinder revolution
(r.p.m) |
Processing capacity
(t/h) |
Max feed particle size
(mm) |
Discharging particle size
(mm) |
rotary motor model | Rotary motor power
(kw) |
Rotary motor voltage
(V) |
Rotary motor revolution
(kw) |
Overall dimensions
(mm) (L×W×H) |
Weight
(kg) |
| XMB three rollers four cylinders
rod mill |
120 | 2 | -0.074 | 0.37 | 380 | 1350 | 760×
510×520 |
115 | ||
| XMBφ160×200
rod mill |
0.25 | 1420 | 1052×
530×1160 |
90 | ||||||
| XMBφ200×240
rod mill |
110 | Y80L-4 | 0.55 | 1380 | 1052×
615×1160 |
155 | ||||
| XMBφ240×300
rod mill |
96 | 3 | Y80L-4 | 0.55 | 1380 | 1052×
615×1160 |
160 | |||
| XMBL-420×600
overflow rod mill |
58 | 0.15 | 6 | -0.5 | Y100L-4 | 1.5 | 1410 | 1800×
1058×1662 |
950 | |
| XMQφ150×50
cone ball mill |
112±2 | 3 | -0.074 | 0.25 | 1400 | 915×
530×1160 |
95 | |||
| XMQ-240×90
corn ball mill |
96 | Y80L-4 | 0.55 | 1390 | 1052×
640×1160 |
170 | ||||
| XMQ-350×160
corn ball mill |
Y90L-6-B5 | 1.1 | 910 | 700×
575×1190 |
300 | |||||
| XMQL-420×450
grate ball mill |
5～10 | Y100L-4 | 1.5 | 1410 | 1630×
1100×1662 |
800 | ||||
| XMQ-460×600
cylinder ball mill |
48 | 2～15 | -0.083
～0.074 |
Y90L-4 | 1400 | 1600×
850×1000 |
560 |
