PoE 10/100Mbps Fiber media converter
Product Description
Symfun PoE 10/100Mbps Fiber media converter supports IEEE802.3U /100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. This manual is for adaptive 10M/100M converters. Comply with IEEE 802.3af, its advanced auto-sensing algorithm enables taking power form IEEE 802..3af, Power Source Equipment(PSE) or Power over Ethernet (PoE) injector. It also supports high safety with short circuit protection and power-in auto-detection (power from AC/DC power adapter or PSE device).
- 10/100Base-TX UTP to 100Base-FX fiber media converter
- IEEE802.3af POE PD compatible.
- Provide -48VDC power to the converter through RJ-45 ETH cable
- Support MD1/MD1-X auto sensing
- Built-in DC/DC Power supply
- Optical port support dual-strand and single-strand
- Choice of SC, BIDI or LC connector from multimode/single mode
- Single mode up to 120km. Multi-mode 2km
-
Technical parameters:
1. Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3af PoE PD standard
2. Connector: one UTP RJ-45 connector, one SC/ST connector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
--1A~2A@5V DC from AC/DC adaptor
--60mA@48V DC from IEEE802.3af PSE or PoE injector
5. Environmental temperature: 0℃-60 ℃
6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode: 8.3/125, 8.7/125, 9/125 or 10/125μm
10. Dimensions: 26(H) × 71(W) × 95(D) mm
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,