Model: | - |
---|---|
Brand: | weyou |
Origin: | Made In China |
Category: | Industrial Supplies / Tools / Electric Power Tools |
Label: | electric rope hoists , double girder hoist , electric hoisting |
Price: |
-
|
Min. Order: | 2 pc |
Last Online:07 Mar, 2013 |
Low headroom electric hoist
A new generation of low headroom electric hoist, its structure design is exquisite, superior performance, novelty and good-looking appearance,
To achieve the same products abroad level of technology. It is suitable for machining, assembly, warehouse and so on many kinds of material handling place,
Especially for the plant height restriction of places.
This type wire rope electric hoist is improved from CD1 & MD1 type electric hosit, the working condition same as CD1 & MD1 type wire rope electric hoist, it increases more lifting headroom and save the construction space of workshop(200
Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum: Grooved hoist Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system: Model CD1 and MD1 hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.
Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
Low Headroom Electric Wire Rope Hoist technical specification | ||||||||||
Lifting Capacity T | 0.5 | 1 | 2 | 3 | 5 | 8 | 10 | 16 | 20 | |
Lifting Height M | 6-30 | 6-30 | 6-30 | 6-30 | 6-30 | 6-30 | 9-30 | 9-30 | 9-30 | |
Travelling Speed M/min | 20(10) | |||||||||
Lifting Speed M/min | 8 | 8 | 8 | 8 | 8 | 5 | 7 | 3.5 | 3.5 | |
Wire Rope Type | 6*37+NF | 6*37+NF | 6*37+NF | 6*37+NF | 6*37+NF | 6*37+NF | 6*37+NF | 6*29FI+FC | 6*29FI+FC | |
I-STEEL Beam Tack Type (GB706-1998) | 16-28b | 16-28b | ||||||||
Mini curvature radius | 1-1.2 | 1-3.3 | 1.2-3.5 | 1.2-3.5 | 1.5-4 | 2.5-8.5 | 2.5-7.2 | 3.5-9 | 3.5-9 | |
Lifting Motor | Model | Zd1 21-4 ZDS1 0.2/0.8 | Zd1 22-4 ZDS1 0.2/1.5 | Zd1 31-4 ZDS1 0.4/3.0 | Zd1 32-4 ZDS1 0.4/4.5 | Zd1 41-4 ZDS1 0.8/7.5 | Zd1 41-4 ZDS1 0.8/7.5 | Zd1 51-6 ZDS1 1.5/13 | Zd1 51-6 ZDS1 1.2/11 | Zd1 51-6 ZDS1 1.5/13 |
Motor (KW) | 0.8 | 1.5 | 3 | 4.5 | 7.5 | 7.5 | 13 | 11 | 13 | |
R.P.M R/min | 1380 | 1380 | 1380 | 1380 | 1380 | 1380 | 930 | 930 | 930 | |
Power 3P | 380V; 50Hz;3Phase | |||||||||
Running Motor | Model | ZDY1 11-4 | ZDY1 11-4 | ZDY1 11-4 | ZDY1 11-4 | ZDM1 12-4 | ZDM1 12-4 | ZDM1 12-4 | ZDM1 21-4 | ZDM1 21-4 |
Motor (KW) | 0.2 | 0.2 | 0.4 | 0.5*2 | 0.8*2 | 0.8*2 | 0.8*2 | 0.8*2 | ||
R.P.M R/min | 1380 | 1380 | 1380 | 1380 | 1380 | 1380 | 1380 | 1380 | 1380 | |
Power 3P | 380V; 50Hz;3Phase |