Product Description
The forming-cutting machine works on the principle of vacuum hot-compression forming. The roll material will be pre-heated, formed, cooled and cut into single blister. It’s designed with the integration of machine, electricity and gas. It is controlled by PLC man-machine interface system and it is easy to operate. The time of heating, forming and transportation can be enforced by stepless speed regulation. It has such advantages as high speed of forming and cutting. Since the machine adopts the fully closed structure, it’s safe to operate.
The main technical parameters:
Number
|
project
|
description
|
1
|
Cutting times
|
10-50times/minute(It depends on both the shape of the production and the thickness of the materials)
|
2
|
Maximum forming area and depth
|
345*152*30(L*W*H)mm
|
3
|
power supply
|
Power supply: the three-phase four-wire
380V 50hz(220v 60Hz)
|
4
|
Main Engine
|
6kw
|
5
|
Raw materials
|
PVC,PET,PP,PS……
|
6
|
Appearance Size
|
2710*720*1600(L*W*H)mm
|
7
|
Overall weight
|
1600KG
|
Advantages:
2. It consumes low power and it’s easy to operate.
3. The molding cylinder uses 4 balance guide pins in order to reduce the attrition of the cylinder and increase the service life.
4. Quick speed of pulling pieces. So as to send pieces accurately.
5. Quick mould- changing speed and quick replacing institutions in forming mechanism design.
6. Rapid parameter design and adjustment due to the computerized control system and touch screen operation
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,