Home > Products > Industrial Supplies > Other Industrial Supplies

 50ml 4:1/10:1 Impression Material Dispensing Guns Dental dispenser

Description:CG50-10-1

Suitable Cartridge: 50ml 10:1 / 4:1

Weight: 0.26kg/piece/box

Packing: 50cases/carton

Inner packing:185mm*115mm*65mm

Outer packing: 610mm*215mm*300mm 

Instruction:

1 Open the top of the dispenser and then pull the rack to reach the maximum. 
2, Put into impression material cartridge, and lock it by the dispenser.
3, Promote the trigger to make the impression material come out smoothly from the cartidge
4, After using, put the rack back to the original location. 
5, Remove the cartridge, then to repeat the above operation.

Function for dental dispensing gun,

 No need Power and Air Pump. It is completely operated by hand, leggiere-design and easy to be taken. It is used for catalyst with mixing impression materials, silica gel or self-solidifying compound resins etc. The ratios of dispensing guns include 1:1/2:1, 4:1/10:1, with cream-colored gun body and black push rod. Two-component dispensing guns can avoid pollution when it is used for mixing adhesives, fast-occlusion silica gel and various impression materials.

S ested Use Materials:

• Epoxies, Acrylics, Silicones, Polyesters.
• Epoxy Acrylates, Hybrids, Urethanes.
• Polysulfides, foams, MS Polymers, polyureas.