Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

Features
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto check quality of  cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu

Specifications
Model KL-280
Applicable fibers SM(ITU-T G.652),MM(ITU-T G.651),DS(ITU-T G.653),NZDS(ITU-T G.655)
Fiber cleaved length 8~16mm(Coating diameter: 250µm)
16mm(Coating diameter: 250 ~ 1000µm)
Fiber diameter Cladding diameter: 80 ~150µm Coating diameter: 100~ 1000μm
Fiber Count Single
Fiber aligning method Core  aligning
Return loss >60dB
Actual average splice loss 0.02dB(SM),0.01dB(MM),0.04dB(DS),0.04dB(NZDS)
Splicing mode auto
Splicing mode 12(templet),188(user)
Typical Splicing time Typical 9 sec, with standard SM fiber
Protection sleeve length 60mm, 40mm and a series of micro sleeves
Storage of splice result 5000 results, 3 parameter per result
Tension test 2N
Fiber display and magnification 400X(X or Y view), 200X(X and Y view)
Tube heating time Typical 30 sec
Electrode life 2500
No.of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner Li-battery
Display screen 5 inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals RS 232
Operating condition 0 ~ 5000m above sea level,0 ~ 95%RH and -10～50C,respectively,Max. wind velocity of 15m/s
Power supply AC 100-240V with AC adapter;inner Li-battery(6600mAH)
Dimensions 150mm(L) x150mm (W) x160mm (H)
Weight 3.52 Kg including battery