HDMI fiber extender 25 km HDMI optical transceiver

Model:	DT100SF
Brand:	PWAY
Origin:	Made In China
Category:	Construction & Decoration / Building Establishment
Label:	HDMI optical fiber t , HDMI fiber extender , HDMI optical transce
Price:	US $360 / pc
Min. Order:	2 pc

Inquire Now

Member Information

Shenzhen pinwei technology Co., LTD

Free MemberGuang Dong - China

Last Online:14 Mar, 2016

Product Description

DT100F

HDMI Fiber Optic Transmission

1.0 Introduction

2.0 Panel Description

3.0 Function Specification

4.0 Connection and operation

1.0 Introduction

DT100F is a perfect solution for transmitting HDMI audio and video through the fiber, the set of device includes a sender of DT100FT and a receiver of DT100FR. Our products transmit the HD video through gigabits of optical fiber, which making the images clearer as well as the transmission more stable. Also, it can transmit gigabits of Ethernet data while transmitting the HD videos, At the same time, the product has the built-in IR remote control function.

2.0 Panel Description

2.1 Front Panel

	HDMI TX	HDMI RX
HDMI PORT	Video Input	Video Output
IR PORT	IR Input	IR Output
RJ45	Network Data Transmission
Fiber Port SC	Optic-fiber Data Transmission
RESET KEY	Hold down the key for 8 seconds after power on, the model will restore default settings

2.2 Back Panel

It contains a100~220v AC plug seat, please plug in the100~220V AC power supply while using it.

Attention：To ensure your safety, please use the our original power cords , and connect to the secure socketcorrectly.

2.3 Indicator led.

Indicator led	Status
Power	Light On	The power of the device
Status	Light On	The video device starts up.
Status	Flash	The video device connected successfully
Link act	Light On	Network Link up
Link act	Flash	Packets of data are transmitting in the indicating port
1000M	Light On	The indicating port working in the status of 1000M
1000M	Light Off	In the state of 10M or 100M
Dpx	Light On	In the State of full-duplex
Dpx	Light Off	In the State of half-duplex

3.0 Function Specification

> HDMI 1.3/HDCP1.1 & 1.2

> Both Optic-fiber transmission and Ethernet Transmission

> Support point-to-point mode, one point-to-many mode and cascaded transmission mode.

> Standard and International 802.3Z gigabit Ethernet standard.

> built-in IR remote control function, you can control the set-top box at the receiving site using the IR remote control.

> Pure hardware design, just plug and play, no need to install extra software.

Video Parameter
Video Resolution	640X480 @ 60fps 800X600 @ 60fps
	1024X600 @ 60fps 1024X768 @ 60fps
	1152X864 @ 60fps 1280X600 @ 60fps
	1280X720@ 60fps 1280X768@ 60fps
	1280X800@ 60fps 1280X960@ 60fps
	1280X1024@ 60fps 1440X1050@ 60fps
	1440x900 @ 60fps 1600x900 @ 60fps
	1660x1200 @ 60fps 1680x1050 @ 60fps
	1920x1080 @ 60fps 1920 x1200 @ 60fps
Audio	32kHz, 44.1kHz and 48kHz
Infrared Support	38KHz; NEC code
HDMI Version	HDMI 1.3
HDCP Version	HDCP 1.2
Other Parameters
Power input	AC input: 100V - 240V (50 - 60Hz)
Max Power Consumption	DT100FT: 5W
Max Power Consumption	DT100FR: 5W
Size (L-W-H)	210×140×30 mm
Net Weight	785g*2pcs
Operating Temperature/Humidity	0℃ - 70℃ / 10% - 80%RH(no condensation)
Storage Temperature/Humidity	-10℃ - 80℃/ 5% -90% RH(no condensation)

Fiber Parameter

Product Model	Max Distance	Fiber type	Optical Interface	Wave Length	Optical Power	Receiving Sensitivity	Link Budget
DT100F-S3	3KM	single mode	SC	1310nm	-9~-3dBm	-26dBm	-17dBm
DT100F-S3	3KM	single mode	SC	1510nm	-9~-3dBm	-26dBm	-17dBm
DT100F-S20	20KM	single mode	SC	1310nm	-9~-3dBm	-26dBm	-17dBm
DT100F-S20	20KM	single mode	SC	1510nm	-9~-3dBm	-26dBm	-17dBm
DT100F-S40	40KM	single mode	SC	1310nm	-9~-3dBm	-26dBm	-17dBm
DT100F-S40	40KM	single mode	SC	1510nm	-3~+2dBm	-26dBm	-23dBm
DT100F-S80	80KM	single mode	SC	1490nm	-3~+2dBm	-26dBm	-23dBm
DT100F-S80	80KM	single mode	SC	1510nm	>0dBm	-26dBm	-26dBm

4.0Connection and operation

1. Please connect the HDMI signal source to the DT100FT。

2. Connect DT100FR to the HD displayer.

3. Between DT100FT and DT100FR (SC port-to-SC port) use optical fiber to connect.

4. if you want to transmit network data while transmitting the videos, please connect the RJ45 port , this port support gigabit transmit.

5. IR remote control function, connect the IR receiver to the HDMI TX and connect the IR transmitter to the HDMI RX.

6. Power on the device, POWER light on, then it will do the self-checking job with the other indictors blinking automatically. When the STATUS light on or flash, the device starts up.

Payment Terms:	TT

Product Image

Img 1

Img 2

Send Inquiry to this Member

Shenzhen pinwei technology Co., LTD

Shenzhen baoan district waves street huaning road everlast rong (displays) science and technology park 3 4 5 floor

Phone:: 86-0755-28074847

Fax:: 86-0755-29407089

Contact:: adalee (manager)

Mobile:: 13903025160

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.