Home > Products > Construction & Decoration > Other Construction Materials

1.Light Diffusion PC Sheet’s transmittance rate is 45%, while the general-purpose PC opal polycarbonate panel’s light transmission rate is only 20%, do not see the light source while maintaining high transmittance at the same time, the advertising effect is more realistic as used in the advertising light box industry, and save energy, proved that light box which combination by LED light source and light diffuser saving over 80% than the traditional light box by ordinary fluorescent tubes and general-purpose PC opal polycarbonate panels;

2. LED, BLUE, fluorescent lamp and other light sources send out light around. It has repeated reflection, refraction, scattering with the other light which is in touch with dispersant within the polycarbonate sheet. The whole process makes uniform luminance outward.

3. It is suitable for any light sources such as LED, neon, gold electrodes and so on.

4. Aging resistance. Lai Nuo HaoLight Diffusion PC Sheet is co-extruded UV layer thickness of 50 microns on one side can block ultraviolet rays pass through and therefore has good weather resistance. The anti-UV treatment layer side, must be installed toward the sun

5. Fire retardant .Light Diffusion PC Sheet’s own ignition is 580 ° C, will be self-extinguishing away from the fire. Combustion does not produce toxic gases, not spread the fire, according to national standard GB8624-1997 which fire retardant is Grade B1.

6. Environmental protection

7. Lightness, resist heat and tightness

8. Graceful appearance

Application

Advertising box,

Bulletin board,

Outdoor advertising,

LED electronic signs,

LED light box

Illumination, etc

Cleaning & Maintenance

According to correct procedure, suitable cleanser and tools are used to clean the sheets regularly. It could keep the sheets graceful and extend the sheets’ useful life:

1. Rinse sheet with lukewarm water (under 60°C)

2. Please choose cleanly and soft cloth or sponge with neutral liquid soap or detergent to clean the dirt on the surface lightly

3. Rinse sheet once again

4. The soft cloth with anhydrous alcohol could be used for cleaning, if oil, wet paint, glue spotting and other things are on the sheet.

5. Rinse with cold water and dry with a soft cloth to prevent water spotting after cleaning.