Model: | - |
---|---|
Brand: | - |
Origin: | Made In China |
Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Stainless Steel |
Label: | - |
Price: |
-
|
Min. Order: | - |
Last Online:30 Jan, 2013 |
304 stainless steel coil
1.Produced by TISCO
2.The high level quality
3.The lowest price
Product Description |
stainless steel coil |
Grade |
304 321 316L 309S 310S 201 202 |
standared |
JIS, AISI, ASTM, GB, DIN,sus |
Thickness |
0.4mm 0.5mm 0.6mm 0.7mm 0.8mm 0.9mm 1.0mm 1.2mm 1.5mm 2.0mm2.5mm 3.0mm |
SIZE |
1000*2000/1219*2438 or as the customer requirest |
Surface finish |
2B, BA, Hair Line, No.1,No.4, Mirror Finish |
Application |
chemical, metallurgy, boiler |
Contacts |
If you have any question, please contact us with mile, msn or telephone. |
Product Packing |
Export standard package :bundled wooden box or be required; The inner size of container is below: 20 ft GP:5.8m(length)x 2.13m(width)x 2.18m(high) about 24-26 CBM 40 ft GP:11.8m(length)x 2.13m(width)x 2.72m(high)about 68 CBM We will packing as the factory ,and reach the stander of export . Or as the customer request.In addition,We will make the products with good surface protection. |
Delivery time |
within 30 days after we got your 30% deposit |
Payment |
30% deposit by after s igned this contect. The balance payment by T/T after got the faxed B/L |
Attention |
We are the agent of TISCO in north, China. And we have the best and the longest contect relation with JISCO, BISCO,KSK, and KRUPP. We can also produce the stainless steel sheet,bar, pipe,tube ...which is unstandared. We will give you the bottom price and the fastest speed and then give you the satisfied service for you |
304 stainless steel coil
1)cold rolled 304 stainless steel sheet
2)ASTM A240 stainless steel sheet
3)304 Steel plate
5)standard: ASTM AISI JIS STS GB DIN
6)thickness:0.3--80mm
7)width:1000/1219/1250/1500mm
304 Stainless Steel sheet
Stainless steel 304 is an austenitic grade that can be severely deep drawn. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans.
Chemical Composition of Stainless Steel 304
Table 1. Typical chemical composition for 304 stainless steel alloys
% |
304 |
304l |
304H |
C |
0-0.07 |
0-0.03 |
0.04-1 |
Mn |
0-2.0 |
0-2.0 |
0-2.0 |
Si |
0-1 |
0-1 |
0-1 |
p |
0-0.05 |
0-0.05 |
0-0.05 |
s |
0-0.02 |
0-0.02 |
0-0.02 |
Cr |
17.5-19.5 |
17.5-19.5 |
17.5-19.5 |
Ni |
8-10.5 |
8-10.5 |
8-10.5 |
Fe |
Balance |
Balance |
Balance |
Properties of Stainless Steel 304
Mechanical Properties of Stainless Steel 304
Table 2. Typical mechanical properties for 304 stainless steel alloys
Grade |
304 |
304L |
304H |
Tensile Strength (MPa) |
520-720 |
500-670 |
520-720 |
Compression Strength (MPa) |
210 |
- |
- |
Proof Stress 0.2% (MPa) |
210 |
200 |
210 |
Elongation A5 (%) |
45 Min |
45 Min |
40 Min |
Hardness Rockwell B |
92 |
- |
- |
Physical Properties of Stainless Steel 304
Table 3. Typical physical properties for 304 stainless steel alloys
Property |
Value |
Density |
8.00g/cm2 |
Melting Point |
1450°C |
Modulus of Elasticity |
193 GPa |
Electrical Resistivity |
0.072x10-6 Ù.m |
Thermal Conductivity |
16.2 W/m.K |
Thermal Expansion |
17.2x10-6 /K |
Surface finished
Slitting Process Service
Slitting Parameter: 1.thickness 0.1mm-14mm 2.minimum width 12mm-50mm
3. Maximum 18-30 slitting
Plate/Sheet Polishing Service
Polishing Parameter: 1.thickness 0.3mm-25mm 2.width:1000mm-2600mm
3.surface:8K,HL,No.4,SB,DUPULA,BA
Laser Ctting Parameter
1. thickness:0.5mm-25mm 2.width: 2000mm-4000mm
3.length: 6000-32000mm 4.persision:0.3-0.4mm
Plasma Cutting Parameter
1.thickness:6.0-120mm 2. Max. width:3300mm
3.MAx.Length:16mm
Bending Parameter
1.Bending capacity: 225-3000T 2.Max.Bending length:15000mm
3.Bending thickness: 100mm
Shearing parameter
1.thickness:6.5-25mm 2.Length: 3100-6100mm
3.Acoid-twist function:(width:thickness) 5:1