Model: | HD-1224-4 |
---|---|
Brand: | Hongda Boke |
Origin: | Made In China |
Category: | Industrial Supplies / Machinery / Engraving & Etching Machine |
Label: | Wood cnc router , engraving machine , woodworking machine |
Price: |
-
|
Min. Order: | 1 pc |
Last Online:17 Jul, 2014 |
Equipment Features of wood cnc router:
A.Many machine heads can process at the same time, can also be usd alone, many times increasing in efficiency.
B.Can also control the machine heads indepently, can use only one head to process and make the increasing the working area.
C.Adopt German double-nut ballscrows, imported square guide rail, the adoption of the breakpoint monory, Guarantee in the accident(power off) or the next day can process.
D.Gantry movement, long time use no distortion, the more precise positioning accurancy.
E.Large cutting power not only to elaboratey carved a jagged, smooth clear bottom.
Increase the efficiency when doing the complicated graph. good coherence and high quality when bach processing, good stablity with the long time working and low error ratio.
F.Well compatibility in software:all kind of 3D and JD caving software.
G.Can make the quantity of the heads and the working area for the machine as per customer's request.
standard configuration:
1.Whole steel stucture, three axies imported square orbits, imported ballscrew, three axies dust proof and water proof,
2.3kw imported bearing water cooling spindle,
3. fully shielded, uneasy distorted cable,
4.Weihong control system, Wentai Software and Type3 Software,
5.20 cutters(φ3.175, φ4, φ6), 3 collets
Configuration for multi-head wood cnc router 4'x8':
step moptors ,PMI linear square orbit,dust collector,DSP control/NC Studio,water cooling spindle,bar suction table,
working samples of wood cnc router:
Standard export wooden case:
Technical parameters:
Model |
HD-1224-4/1313-2 |
XY working area |
300*2400 |
Z working area |
200mm |
Table size |
1380*2900 |
Max feeding |
>10m/min |
Processor |
DSP/Frequency 100MHz |
Work-holding |
By clamp |
Interface |
USB |
Command |
G code*.u00*.mmg*.plt |
Surroundings for software |
DSP |
Power(not include the spindle) |
2000W |
Working voltage |
AC220V/50Hz |
spindle power rate |
6x1.5KW/2.2KW(water cooling)/air cooling |
spindle rotating speed |
0-24000rpm/min |
Drive motor |
step or servo |