Home > Products > Electronics & Electricity > Other Electrical & Electronic

Purpose of Insulation piercing connectors(IPC) is to connect main and one tap

conductor’s of section, how is written on IPC body. Type without letter B serves to connect isolated conductors, with letter B bare conductors. IPC for one tap conductor is equipped with cable termination cap PCEC 16 / 120, for two output wires - no cap.

   IPC consists from two glass-fiber reinforced plastic parts, which are fitted with two brass tinned teeth’s, which are coated with UV-curing silica grease and the teeth are fitted with rubber insulation. This set is associated with the bolt, nut and pinch fixation segment. The terminals marked T are equipped with tear head. The lower part of the clamp is designed to be hold by the key 17 and the ventilation chamber,

providing optimal ventilation of IPC.

Product can be also used as tap connector inside low voltage boxes.

PRODUCT RANGE:

PCT13 150/150 RE/RM,isolated 6-150mm /isolated 6-150 mm,Cu/Al.
PCT13C 120/10 RE/RM,isolated/bare 1.5-10mm / isolated/bare 6-120 mm,Cu/Al.
PCT13C 70/35 RE/RM, isolated 6-70mm / isolated 4-35 mm,Cu/Al.
PCT24 120/120 RE/RM, isolated 6-120mm / isolated 6-120 mm,Cu/Al.
PCT24 240/150 RE/RM, isolated 95-240mm / isolated 16-150 mm,Cu/AL
PCT13B 150/150 RE/RM, bare 6-150mm / isolated 6-150 mm , Cu/Al.
PCT13CB 120/10 RE/RM, isolated/bare 1.5-10mm / isolated/bare 6-120 mm , Cu/Al.
PCT13C 70/35 RE/RM ,bare 6-70mm / isolated 4-35 mm , Cu/Al.

PCT23C 185/185
PCT24B 120/120 RE/RM, bare 6-120mm / isolated 6-120 mm , Cu/Al.
PCT24B 240/150 RE/RM, bare 95-240mm / isolated 16-150 mm , Cu/Al.

USED MATERIALS:

UV & fire resistant PA66 ,PVC , dacromet or H.D.G.(optional) finished steel, tinned cooper.

VARIANTS:

The product is manufactured and supplied in modification’s as is showed upwards in PRODUCT RANGE.