Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Other Communication Equipment

Main features

◆Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex.

◆ UTP port supports MDI/MDI-X auto crossover.

◆ Indicator function of link fault (LFP): When optical fiber or UTP is at fault, the converter could stop all the link.

◆ Multiple Optical Transceiver could be chosen: SC, ST or FC, singlemode / multimode

◆ Supporting 1600 bytes packet for management 

◆ Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode.

◆ Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.

◆ Internal or External switching power: for users to choose.

Technical Specifications

◆Operating standards：IEEE802.3u、10/100Base-TX and 100Base-FX；

◆MAC addresses table: 1K

◆Data buffer: Built-in 128Kbyte RAM .

◆Connectors: UTP Connector: RJ-45, 10/100Mbps;  Fiber Connector: ST/SC/FC, 100Mbps

◆Cable:

UTP: Cat. 5 (the max distance up to 100m)

Fiber ( Multimode): 50/125, 62.5/125μm（the max distance up to 2km or 5km）

Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm（the max distance up to 20 -120km）

◆Flow Control

 Full Duplex: Supporting standard IEEE802.3x

 Half Duplex: back pressure

◆LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.

◆Power Requirement: Input :AC 170 ～ 240V or DC -36V-72V

Output:DC 5V.1A

◆Time Delay: <0.9us

◆Storage Temperature: -40~ 70 ºC

◆Operating Temperature:0 ~ 50 ºC

◆Storage Humidity: 5%~90% non-condescending

◆Ambient Temperature: 0 ～ 70℃

◆Dimensions: Internal power:  30×110×140mm

External power:  26×70×93mm

Fiber Optic Information