3)Advance video control system and Super input system;
4)Low maintenance cost ;
5)Vividly display;
6)Wide viewing angle;
7)Easy installation and maintenance;
Specification:
Item
Specifications
LED Lamp
Type
12.5 mm dismeter high brightness LED lamps
Arrangement
1R,1G,1B
Red Wavelength (dominant)
625nm(+2.5nm)
Green Wavelength (dominant)
523nm(+2.5nm)
Blue Wavelength (dominant)
470nm(+2.5nm)
LED Cabinet
Dot Pitch
12.5 mm
Physical Pixel
6400dots/sq.m
Resolution
80*80pixel
Dimension
1000*1000mm
Brightness
above6500nit
Viewing Angle
110(Horizontal),55(Vertical)
Best Viewing Distance
12~150 meters
Power Consumption (Max)
600 w/sq.m
Power Consumption (Typical)
200 w/sq.m
Weight
50 Kgs/sq.m
Frame Frequency
no less than 60 frame/sec
Refresh Rate
no less than 800 HZ/sec
Voltage
220/110 VAC, 50/60 Hz
MTBF
5000 hours
Life Pan
100,000 hours
Protection Level
IP 65
Malfunction Dot Rate
less than 0.0001
Working Temperature
-25°C~65°C
Humidity
10%~99%
Control System
Drive Mode
static constant current
Control Mode
synchronous /asynchronous
Control System
PCTV Board + DVI Board + Control Board + Network cable Transmission
Software
LED Studio (LINSN)
Input Signal
RF,S-VIDIEO,RGB,RGBTV,YUT,YC,COMPOSTITION
PC System
Win2000,Win XP, etc
Features
- GENELITE /CREE lamp with uniform color and high reliability - Super brightness, long and wide viewing distance - Automatic pipelining production - Use static-constant current for smooth and nature color transitions - Outstanding consistency in color and brightness, no Mosaic effects
- Special structure design for water-proof and mothproof - Modular design for easy installation and maintenance - Operating software compatible with widely available software - Can be designed hanging system to satisfy special conditions
Warranty:
1.We guarantee all our display, modules, spare parts (Silan Chip) for TWO years.
2.We provide technology training for free, which contains the operation and maintenance training of the LED screens in the factory.
3.After warranty , we also can offer you the parts for replacement at our bottom price.
4.After sales, if you have any problem about our product, you can inform us by Email, we will reply you at once when we get it and offer you a good solution to solve the problem.
5.We also could solve problems for you until it recovers well by remote control!
Delivery Time:
1.Delivery time: Accomplish manufacturing within 25 days after receiving the deposit.
2.Before delivery, we will test the display, and keep it light up for 72 hours, and check all the parts of the display to confirm it is Ok for delivery
Installation:
1.We can assist the training and technical support for the customer in the factory, if the customer requires so.
2.We could send our engineer to guide the installation for you. But the relevant cost should be paid by your esteemed company.
3.Our technicians will offer CAD Drawing to show how to install the LED Display rightly and fast, of course, if you need.
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content. To report fraudulent or illegal content, please click here.
