Home > Products > Industrial Supplies > Textile Machinery Parts

Complete Line of Cotton Ginning Equipment

A complete line of cotton ginning equipment is including seedcotton handling system, bulk seedcotton auto-feeding system, rock catcher foreign fiber cleaner and seedcotton control system, drying and cleaning system, giing and lint cleaning system, condensing, humidifying and baling and weighing and bale conveying system.

Advanced Technology
1. This set of equipment consists of seedcotton auto-feeding system, drying and cleaning system, ginning and lint cleaning system and lint baling system, etc.
2. The seedcotton is fully cleaned during processing, the moisture contents is controlled effectively, and lint is cleaned finely.
3. Three-way valves are separately equipped on the seedcotton drying section, seedcotton cleaning section and lint cleaning section. According to the cotton conditions the cotton processing technological line can be adjusted quickly which can both assure the seedcotton Processing and reduce power consumption.
According to the cotton conditions, teh cotton processing technological line can be adjusted quickly which can both assure the seedcotton processing and reduce power consumption.

High Capacity
1. Fully considered the features of hand-picked upland cotton, the main equipments in this set of equipment are optimum designed by our engineers, and the auxiliary units, such as the conveying unit, etc. are also designed with great concentraion, bring the potential of each section into full play, which lead to an optimal economic benefit.
2. This set of equipment has good adaptability for the seedcotton moisture content. When the seedcotton moisture content is 8-12%, the equipments can be run normally without drying and assure the lint quality as well.

Hgih Automation
1. MANUAL and AUTO modes are designed in this set of equipment and adopt central controlling.
When on the AUTO-mode, not only every main equipment can be actulized with auto-control feeding, but also the whole technology system can be auto-controlled according to production condition.
2."Interacting connections" are accomplished between the machines with later procedure protecting function. Inspect and control units are equipped on the key points to avoid accident.

Fine Working Environment
1. Environment in the workshop is clean and tidy, equipments are easy to operate.
2. Dust content of exhaust air of the ginnery is conform to the related regulations of environment protection.