The AE-780 is a light weight, pocket-sized, auto ranging surface Surface Resistance Meter. It is designed
to test conductive, anti-static, and static dissipative surfaces for electrical resistivity according to the
ESDA’s parallel resistivity probe method DIN EN 100 015/1 & ANSI/ESD-S11.11.
If meter is purchased with the accessory kit, it will comply to IEC 61340-4-1, ANSI/ESDA S4.1 &
ANSI/ESDA S.7.1 when the five punch electrodes are used.
AE-780 Surface Resistance Meter Includes:
Tester
Two accordion cables (stereo to banana)
9 volt battery
Certificate of calibration
AE-780-1 Accessory kit
Two 5lb probes
Foam lined carrying case
Limits
Resistivity: 103-1012 ohms/sq.
Resistance: 103-1012 ohms
Measuring voltage: 10v and 100v
Introduction
The AE-780 Surface Resistance Meter is an easy to use tester for measuring surface resistivity. The
AE-780 Surface Resistance Meter with the AE-780-1 accessory is a dependable audit kit for conductive
and dissipative surfaces. This meter is designed to be used in all facets of material production including
engineering, maintenance, quality control, incoming inspection, manufacturing, research, or sales
departments for the testing of anti-static mats, floor finishes, paints, wrist straps, smocks, foot wear, bags
and containers.
When using the built-in electrodes, the meter’s test values for surface resistivity are in ohms per square
(although they are displayed in ohms). When using the external five pound electrodes, the meter’s test
values for resistance are in ohms.
