TheCA1250 is a major step forward in installation amplifiers technology. Twelve mono Zone power amplifiers, featuring 85% class D design technology, can operate as 6 independent Zone amplifiers. Self-explanatory Input and Output connections are easy to follow since any of the 12 mono amplifiers can be connected to either 70-Volt, 8-Ohm or 4-ohm speaker circuits.
Each of the 12 mono amplifiers has their own input and output connectors and level Controls. Up to 6 stereo Zones (4-ohm or 70-Volt at 50Watts/channel), 6 mono/bridged Zone amplifiers (110 Watt bridged 8-ohm or 140-Volt). Each zone can be configured independently allowing a combination of Stereo 4-ohm or 70Volt and Mono/Bridged 8-ohm or 140 Volt Zones. Dual-function LEDs on the front panel provide both activity and Clip indication for each pair of amplifiers, which also have their own button-selectable Limiter; Stereo/Bridge modes and 4-ohm/70V modes are also selectable.
The Ch. Input Line/Bus switch selects between either the Bus Input (button depressed) or the individual Zone’s Input signal. Additional features include: any amplifier with no signal at its input is automatically shut off and the CA1250 is able to operate either on 110V-120V/60Hz or 220V-240V /50Hz AC mains.
Continuous Output Power: 30W per channel 8ohms at 1kHz THD 0.1%
50W per channel 4ohms at 1kHz THD 0.1%
100W Bridged 8ohms at 1kHz THD 0.1%
30W per channel 70V/100V at 1kHz THD 0.1%
Total Harmonic Distortion: 0.1% @ 10W
Signal-to-Noise Ratio: 90dB A-Weighted 1Kz
Channel Separation: 65dB 1Kz
Frequency Response: 20Hz to 20kHz+/-1Db
Input Sensitivity: 600mV @ 30W
Tone Control: Bass 100Hz +/-12dB
Treble 10kHz+/-12Db
Global Audio Balanced Input Impedance: 600 Ohms
Line Input Impedance: 47 k-Ohm
Rack mounting requirements: 19 inch rack width, 2U rack height
Power Requirements: 115VAC 60Hz 10A/ 230VAC 50Hz 5A
Dimensions: W430WxH88XD416mm
Weight: 22Kg(48.4lbs)
