Home > Products > Home Supplies > Personal Care Appliance

•  Alternating pressure Mattress specification:

1. Size : 200*90cm
2. Diameter of cells : 9.0cm
3. Number of cells : 20Cells   Cell No4 to No8 eject air
4. Weight: about 3.2KG
5. Material:Nylon/PVC

• Pump Specification:

1. Voltage:  AC 220v/50Hz  110v/60Hz
2. Pressure range: 12~18kpa  
3. Air Output:8.0L/Min 
4. Noise lent: Silent
5. Circle time: 5~6minutes
6. size:  250MM*140MM*104MM
7. Weight : 1.35kg                                     
8. Power cord length: 3.0m

Alternating pressure mattress Features

• The cells of the mattress fluctuate continuously
• CPR air escape design: convenient in emergency rescue
• Tiny holes jetting: restrain the breed of bacteria
• Human design, indication for locations of tiny holes
• Inflating alternately in cycle by two pipes, more powe
• Adjust the pressure manually to a comfortable degree
• Two exterior fuses: ensure the safety and convenient to repair
• Exterior filter: more stable quality, convenient to repair
• The power is not more than 10W,energy saving
• Low noise design, not more than 40DB

 Alternating pressure mattress Three main principles

1.Disperse pressure

·When the pressure is more than 32mmHg, arteries and veins can not exchange Oxygen in time, which leads to the dead of cells and bedsore.

·The Cell structure enlarges the pressed area, reducing the pressure to less than 30mmHg,Which prevents bedsore effectively.

2.Pressure points changes continuously

3.Air jets from the tiny holes on the surface