Home > Products > Construction & Decoration > Slate, Marble, Granite & Stone > Sandstone, Cobble & Pebble

Foshan Aitao Electronic Equipment CO.,LTD

Model: HZJ-3/800 AUTOMATIC MULTI-BLADE CUTTING DRY MILLING PRODUCTION LINE

1   Main technical index:

1.Tile size: 800×800,600×600 mm                

2.Tile size after cut: 800X400, 600×300

3. Water consumption: 50 L/min                     

4. Total length:13m                    

5. Total power:66.05kw               

6. Compressed air pressure:     ≥0.6 Mpa                   

7. Power system: 3Ph,380V,50HZ                                       

8. Cutting output:(cut 600×600 into 600×150)   24pcs/min               

2.    Equipment list:

No.      Description                                                    Qty.

1.      Feeding frame                                             1pc

2.      HZJ-2/800  Dry Tile-cutting Machine                       1pc

3.      Tiles Out frame                                           1pc

4.      Turning   frame                                           1pc

5.      Transition frame                                          1pc

        6.     Single belt Double-side Squaring & Squaring Machine (8 + 2):1pc       

7.      Sponge dryer:                                               1pc

3.    Detailed equipment description:

1. Feeding Frame

1).Conveying line adopt 4 pieces of C type polyurethane belt for conveying, and adopt a mechanical step-less reducer and a worm gear reducer for transmission, motor power: 0.55kW.          

2. HZJ-3/800 Dry Tile-cutting Machine

1).Conveying line adopt 4 pieces of C type polyurethane belt for conveying, and adopt a mechanical stepless reducer and a worm gear reducer for transmission, motor power: 0.55KW.

2).Utility knife adopt drive by turbine worm reducer box and frequency conversion, installed power 0.55 KW.

3. Tiles out frame

1).Conveying line adopt 4 pieces of C type polyurethane belt for conveying, and adopt a mechanical stepless reducer and a worm gear reducer for transmission, motor power: 0.55kW.   

4. Turning frame

1).Conveying line adopt 4 pieces of C type polyurethane belt for conveying, and adopt a mechanical stepless reducer and a worm gear reducer for transmission, motor power: 0.55kW.

2) Power for turning motor : 0.37kw

5).Total power:                  0.92kw 

5. Transition frame   

 1).Conveying line adopt 4 pieces of C type polyurethane belt for conveying, and adopt a mechanical stepless reducer and a worm gear reducer for transmission, motor power: 0.55kW.

 6.Single Belt Double-side Squaring & Chamfering Machine (8+2)

1).With wheel type structure for tiles conveying

2).Single  timing belt

3). Timing belt standard: AT20 type,100mm width

4).Working width:   150-200 mm      

5).Equip with disc squaring spindles,  110x 6(9 pieces) of installing hole site, 8 sets of 3Kw) motor, 2 set of 1.5 KW pneumatic chamfering spindles.

6).Equip with diamond wheel and resin chamfering wheel.

7)The speed of conveyer belt:           6-30           (m/min)

8).The main transmission adopts mechanical step-less transmission , motor power: 2.2 KW.

9).Working width using manual adjustment.

10).Total power:                            29.2 kw