Yonghui C08 turning care bed home multi-function nursing bed
Dimensions: Length 2000mm, bed width 900mm, bed standard height 550mm.
Hole size: 310X230mm
Product Features:
1) The number of cranks is 3, the number is manually turned to one, the manual back is 1, the manual leg is raised and lowered, and the seat is converted to a quick wrench.
2) Adjustment range: the back can be raised and lowered angle: 0-75°
Leg position can be raised and lowered: +25° to -75°
Side turn can be raised and lowered angle: 0-60°
1 second quick opening door: The position of the mouth mattress and the mouth is made of sticky. When you pick up the stool, you don't need to move the nursing staff. Take the mattress and cooperate with the quick-connecting device to open the mouth in 1 second. Zero wait.
It is equipped with an adjustable high and low device, such as sinking in the mouth of the user during use, and can be adjusted to restore the original position.
The container load-bearing plate under the mouth of the mouth is formed by one-time stamping of a steel plate with a thickness of 1.2 mm, which is safe and reliable overall. Back lift pulley design:
It is equipped with 4 widened pulleys to avoid the noise generated by the friction between the bed and the damage to the bed. It reduces the friction and reduces the burden on the nursing staff.
12) Turn left and right pulley design:
Rotating pulleys that are equipped when turning left and right can reduce frictional resistance and increase service life.
Rounded frame design:
The rounded frame design is not simple and beautiful, which increases the integrity of the entire frame and avoids scratching the mattress of the bedding.
User guides
Shake: Designed with metal spiral, the handle surface is plated, foldable, and practical. 4) Rocker: The rocker cartridge is made of steel, anti-fracture, high support force, high wear resistance, safe and reliable, easy to use and no noise, ensuring smooth use and dust jacket. 5) Aluminum alloy guardrail: The total length of the side railing is 1200mm, D-type aluminum alloy handrail, surface hardening treatment, 5 aluminum alloy guardrail pillars. The switch is carefully designed to ensure long-term safety. It is equipped with anti-loose fasteners, wear-resistant, non-deformable, shrinkable and flat, and slightly higher than the bed surface during shrinkage to prevent the mattress from shifting. 6) Bed head plate: ABS engineering plastic is used, the middle is dotted with yellow, and the mold is used for one injection molding, which is resistant to fading, aging, corrosion and easy to clean. A transparent medical record card is placed on the end of the bed, and the Yonghui medical trademark is engraved. The bed head and the tail of the bed can be freely disassembled without any tools.
ingredient
Materials: 1) The bed is made of a 40×80 square tube with a thickness of 1.2 mm. The bed surface is made of a 15 x 30 square tube with a thickness of 1.2 mm. The bed joints are stamped and formed by thick-walled 2.75mm or more pipes or 3mm cold plates. 2) Welding process; The bed frame and the bed surface are fully welded by the robot, the welding is firm, the welding is smooth and sturdy, and durable. 3) Bed spraying process: After the surface of the bed is phosphatized by second acid pickling, it is electrostatically sprayed, and the bed is coated with antistatic powder, which is resistant to acid and alkali corrosion and fade resistant. 4 product configuration mute wheel, aluminum alloy guardrail, dining table, 6 cm mattress, colored cotton bed cover, wash basin, potty, water basin, infusion stand, ABS bed head, installation CD, manual, warranty card 4. Product packaging 1 ) Because the steel used in Yonghui nursing bed is thick, the weight of the product itself must reach 100kg. In order to ensure that the product can reach the customer's hand in good condition, the packaging of Yonghui nursing bed is made of special thickened corrugated carton, and built-in double Layer pad.
The product packaging quantity is divided into 2 pieces, the bed body box size; length 2000 width 980 height 240 bed head box size: length 970 width 140 height 550 total volume is 0.55 cubic
Instructions for use
Leg load-bearing: The support material is a round tube with a diameter of 38mm and a thickness of 5mm. It can withstand 100kg weight safely, securely and without deformation for long-term use. Bed leg folding installation design The bed legs are uniquely folded and installed, just by straightening the bed legs and connecting with the one screw of the bed body. The thickness of the stamping part used at the link is 3.0mm. This design is not easy to install and can ensure the stability of the product. The bed can carry a weight of 300kg.
Stainless steel moving casters: Easy to move freely; with brake device to fix the bed, moving caster diameter 12cm, built-in double bearing, fork with cold plate 2.5mm (thickness) one-time stamping to ensure long-term product life.
Mattress: The outer cover of the mattress is made of pure cotton material. It is comfortable and soft. The inner liner is made of 6 cm high elastic sponge. It has good resilience and anti-insect treatment. It is not deformed for long-term use and has good air permeability.
