Model: | LXD 320 |
---|---|
Brand: | chinacoal |
Origin: | Made In China |
Category: | Industrial Supplies / Construction Machine |
Label: | road lane marking ma , Vibration marking ma , road marking machine |
Price: |
US $2200
/ pc
|
Min. Order: | 1 pc |
Last Online:01 Sep, 2015 |
LXD320 Vibration marking machine
Features:
1.More stable:
Through gravity adjustment, widened front wheel, the Marking Machine is more stable than traditional ones when marking 450mm zebra crossing.
2.Lighter:
Through repeatedly gravity test, rechoose new shaft, the marking machine is much lighter, reduced operator’s working intensity. So the marking works become easier and more effectively.
3.Easy to operate:
Marking hopper’s operating range minimized from 300mm to 200mm, more accurately , easier to control, therefore such problems as slow hopper withdrawal and uneven finishing mark edge are solved. A multi-point sliding block pressing structure is used to avoid material leakage witch often occurs to similar products due to the two tightly pressed sides and large deformation in the middle of product alike.
4.Left Hand Road Lane Marking Machine:
It is applied to High Way,closed roadway. And it also used for where Thermoplastic Kneader melting the coating material at front, several Hand Push Marking Machine working towards to the same direction at high speed, and where side line marking is required, then an ordinary Right Hand Hand Push Marking Machine and a Left Hand Hand Push Marking Machine should be working at the same time. Left Hand Hand Push Marking Machine also applicable to mountain road and slop road marking, working together with Right Hand Hand Push Marking Machine , down to the slop, greatly reduced labour intensity
Technical parameter
Dimension of vibration marking machine |
1360mm×900mm×1100mm |
Weight |
265kg |
Capacity of paint basket |
120kg(60L) |
Beading box volume |
10kg |
Engine |
HONDA liquefied engine.OHV4stoke |
Engine power |
163cc;5.5HP |
Fuel |
LGP dry gas |
Movement driving |
automatic oil-pressured stepless speed changing |
Moving speed |
>400m/h |
Largest slope allowed |
15° |
Height of prominence |
3-5mm |
Width of marking |
150/200/300mm |
Spots recommended
A.Express way:edge line of the express way ,diversion line,decelerating line near the toll booth and turns in the road.
B.Edge line of the city road,double amber line,cross road,sharp turn,entrance and exit of ramp,decelerating line in front of the gates of schools,enterprises and institutions.
C.National,provincial and county roads:continuous declivity slope section,sharp turn preparation section, decelerating line before divaricating road,edge line and single amber line in all sections.
Features of fixing
Compulsory deceleration,reminding by shakes,glistening in rainy days and anti-slippery
1.Compulsory deceleration:remind the driver to slow down in dangerous section such as turn and slopes;
2.Reminding by shakes:Remind and warn the diver who drivers in fatigue or absent-mindedly;
3.Glistening in rainy days:Mark driving safe with clearer visuality.
4.Anti-slippery:Magnify the friction with road and slow down the vehicle.
Major functions
When the driver is driving in fatigue or absent –mind-eely,the car shakes when it passes over the prominent lines giving out harsh noise.As a result,the driver comes back to sense promptly and readjusts the direction of the car thus preventing accidents.The prominent lines have better tree-dimensional reflection of light so that the driver can tell the direction and lane in rainy days.The mark lines guarantee the security of driver and provide compulsory deceleration and anti-slip-pery.