| Model: | - |
|---|---|
| Brand: | - |
| Origin: | Made In Hong Kong S.A.R |
| Category: | Consumer Electronics & Lighting / Lighting / LED Lighting |
| Label: | Pool LED , Waterproof LED , Solar LED |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:29 Jan, 2014 |
Super bright 300leds with high quality.
Low power consumption,high stability of 18W .AC12V.
Lumen:1500LM. constant current drive to the led.
Diameter:25cm; Height:5cm
Waterpoof: IP68 with CE CERT.
The material of the lamp is ABS plastic which is anti-rust and anti-UV even used in salt water pool.
And the lamp is resin filled,which makes it 100% waterproof.
With 2 meters cable.(If you need longer cable,it charges:USD 2/meter).
High temperature protection guarantees the long working life up to 100000 hours.
Wall hanging style,no niche,easy to install,suitable for swimming pools,fountains,etc.
Installation
All lamps should be placed on the wall of the pool at approximately 700mm below the water surface,
in areas that are easily accessible from the upper edge of the pool.
1. It is highly recommended to use the underwater cable gland
2. All lamps should be installed on the same transformer and switch.
Dissemble the bracket from the back of the lamp. Place the bracket over the desired location,mark the holes, drill the holes, insert the roll plugs, and fasten the bracket on the pool wall using the stainless steel screws provided. Wind the cable behind the lamp, and then fasten the lamp on the bracket.
Please find out our products from: http://hkglobpower.com