Model: | C-100AB |
---|---|
Brand: | KLB |
Origin: | Made In China |
Category: | Chemicals / Chemical Auxiliary & Catalyst / Chemical Auxiliary |
Label: | curing agent , coupling agent , cross linker |
Price: |
US $10
/ pc
|
Min. Order: | 50 pc |
Last Online:27 Nov, 2013 |
C -100A/B Platinum cross-linking agent
1. Introduce
C-100A and C-100B belongs to platinum addition type cross linking agent and can be approved by FDA after cured, also characterized by non-toxic, odourless, high transparent and well anti-yellowing.The materials can be cured again if low-molecular -weight is strict by request.
This agent are mainly applied to Food Grade and Medical Grade products, such as nipples, cake mold, silicone cookwares, medical silicone tube and so on, also can be used for extrusion products and mobile phone keypad.
2. Component
A: Platinum catalyst B: Organosilicon polymer
C: Silicone cross-linking agent D: Vulcanization retarders
3. Physical Properties: (Tested by KE-951U Gel)
Appearance: Milk white or semitransparent light yellow
Specific Gravity(23℃) 0.9~1.0
Hardness(ShoreA) 49~51
Tensile Strength (Mpa) 10~13
Elongation at Break(%) 500~530
Cracking Resistance(KN/m) 24~27
Compression Set %(100℃/22h) ≤5
4. Notes
1. Avoid to contact with nitrogen, phosphorus, sulfur and heavy metal materials,they will cause dead materials.
2. The cross linking agent is added by weight to Part B and should be thoroughly mixed into Part A after adding Part B,the order is important. A and B can not be mixed together.
3. The temperature of mixing machine which used for mixing silicone with this agent can not be higher than 45℃.Please add this agent after being cold.
4. Thoroughly vulcanized materials by this agent must be used up within two days.
5. Pleas choose the suitable raw materials for hot air vulcanization, bad raw materials will cause bubbles.
5. Method of Application:
Type one: Extrusion or Injection Process
1. For High Tensile Silicone Materials(filled with gaseous phase white carbon black)
Application ratio:
C-100B 2.0~2.5%
C-100A 0.5~0.6%
Curing condition: IR(6meters),constant temperature ±5℃.
First curing: IR curing at 190~200℃ for 40~60.
Finished curing: After first curing, it should be cured again as below conditions.
Curing temperature 155~165℃ 165~175℃ Over 175℃
Curing time 3~5minutes 3minutes 2minutes
2. For Normal Silicone Material
Application ratio:
C-100B 1.5~2.0%
C-100A 0.5~0.6%
Curing condition:IR(6meters),constant temperature ±5℃.
First curing: IR curing at 190~200℃ for 40~60.
Finished curing:After first curing, it should be cured again as below conditions.
Curing temperature 80~90℃ 95~110℃ 115~135℃
Curing time 7 minutes 5 minutes 4 minutes
Type two: Molding Process
Application ratio:
C-100B 1.0~1.5%
C-100A 0.5%
Curing temperature: 115~135℃(200~300seconds)
Curing time:Can be adjusted with the thickness and type of the silicone products
6. Packing
1KG/Bottle
7. Shelf Life
4months at room temperature without open.
Special Silicone Adhesive And Silicone prime
|
Name |
Model No. |
Packing |
Mark |
Silicone Primer |
CL-14A |
3kg/10kg |
Applied to double side tape (3M),mainly used for household appliances. |
|
P+R Primer |
K770-1 |
1000ml |
Silicone surfactant, matched with instant glue, applied to P+R process widely. |
|
TPU Primer |
CL-25 |
500ml |
Activating TPU surface, matched with 603, applied to keypad assembly process widely. |
|
Low Whity Primer |
K770-3 |
500ml |
Activating silicone surface, matched with instant glue, applied to P+R process widely. |
|
Metal Primer |
CL-24S-3 |
1kg |
Applied to glue silicone to metal at room temperature or high temperature, applied to kitchenwares widely. |
|
Silicone Adhesive |
KN-300 |
100g/330g |
Silicone glue to silicone at room temperature, replaced Wacker E41& E43 |
|
Silicone Adhesive |
KN-300A |
100g |
Silicone glue to nylon or resin at room temperature, |
|
Medical Adhesive |
KN-300XY |
300g |
Applied to silicone catheter etc medical parts. It will developingunder X-ray.,room temperature cured |
|
Super Glue |
603 |
20g/1kg |
Used for silicone glue to metal or TPU materials. Strength adhesion and low whity.(Match with primer) |
|
Instant Glue |
460 |
20g/1kg |
Used for silicone glue to plastic materials. Strength adhesion and low whity.(Match with primer K770) |
|
Instant Glue |
803 |
20g/1kg |
Low corrosion type instant glue |
|
PET Binding Agent |
CL-26A/B-1 |
1kg |
Silicone binding agent for PET at middle temperature. |
|
Silicone Adhesive |
KL-301A/B |
1kg |
Silicone glue to silicone at high temperature, high adhesion and fast curing. |
|
Silicone binding agent |
CL-24C |
1000ml |
Uncured silicone glue to nylon in mold. Applied to kitchenwares widely. |
|
Silicone binding agent |
CL-26A/B |
1kg |
Uncured liquid silicone bonding with metal/nylon at middle temperature. |
|
Silicone binding agent |
CL-24 |
1000ml |
Uncured liquid silicone bonding with metal/nylon at high temperature. Applied to kitchenwares. |
|
|
Platinum curing agent |
C-100A/B |
5kg |
Applied to FDA and Medical grade needed silicone rubber products. |
Silicone conductive ink |
PD-0455 |
kg |
Silicone conductive coating, mainly used for silicone tubber cable accessories. |
|
Odourless curing agent |
C-16 |
20kg |
The cured silicone products with odourless. |
|
Silicone anti-frost agent |
CL-08F |
20kg |
Frosting from the silicone rubber production process. |
|
Inner release agent |
CL-T10 |
20kg |
Paste, add in silicone rubber, easy to disperse and good peeling off effects. |
|
Outer release agent |
CL-T10B |
|
Water, Spraying on the hot mold, well peeling off effects. |
|
Special silicone ink |
Pantone code |
1kg |
Conductive ink, printing ink,coating ink,soft coating for protecting case and keypads. |
|
Liquid silicone pigment |
Pantone code |
10kg |
Liquid silicone pigment, applied to silicone resin and liquid silicone rubber as extrusion process based. |
|
Silicone pigment |
1kg |
Paste silicone pigment. High temperature resistance and easy to disperse. |