Home > Products > Computers & AV Digital > Mobile Phone & Accessories > Mobile Phone Accessories

l         Charging the battery

  New batteries are not fully charged. Before using it, please charge it first. Full batteries support up to 7-hour continuous call and 200-hour idle.

     Charging Procedures

  1. Insert transformer into AC socket.

  2. Connect transformer with headset, make sure the card is properly inserted. While charging the Red indicator of bluetooth is on.

  3. When battery is full, Red indicator turns off.

  4. After charging please pull headset out of the transformer.

Notes: if you have not used the headset for a long time or batteries run out, the charging indicator may not turn on until minutes later.

l         Match of headset

  Before using the headset, you must math the headset with your mobile, when the match is ok, you can use it. If you want it to match with the other mobile, you must rematch it, then the headset can't be used together with the previous mobile.

1. Before the match, you must first power off the headset, press and hold function button till the blue and red indicators blink in turn.

2. Release the button, earphone immediately enters idle mode waiting for match.

3. Your mobile will display a list of bluetooth device within 1m distance, select BHM-01 to start match process ( for instructions of seeking bluetooth device on mobile, please refer to USER's MANUAL of your mobile).

4. Enter the password "0000" following command of mobile, then press OK.("0000" is default password), when the match is successful, the blue indicator will blink at interval of 2s, the moment bell rings. When match and connection are finished, you can dial and receive calls.

5. If you fail to enter password within required time, the headset will return to idle mode waiting for match, the moment bell rings

l         Start-up headset

Press and hold function button for 3s, you will hear bell ring, the headset has been started-up, ready to connect mobile now.

l         Power off headset

Press and hold function button, you will hear bell ring for 2 times, the red indicator will extinguish after blinking for 2 times, indicating the headset has been powered off.

Notes: the headset may be automatically powered off in minutes if it is not connected with any bluetooth device.

l         Dial a call

Voice call(bluetooth mobile supports voice dial, you must first set voice tag in your phone directory).

Short press function button, when "do..." is heard, say the name of the person stored in your mobile, the headset will automatically dial the number of the person and forward the voice to headset, the moment you will hear the bell.

Notes: If mobile uses bluetooth headset to record voice tags, he receiving effect may be better.

    Dial using mobile

Press buttons to dial as you always do, when the contrary responds, the voice will automatically be sent to the headset.

More functions:

These functions support handsfree bluetooth and AV remote control phone. Please first make sure whether your mobile support these functions by referring to User's Manual.

l         Redial last call

    While in idle state, press and hold function button till "do..." is heard, the last number is redialed.(Bluetooth mobile supports AVRCP, user can select the number to be redialed using VOLUME+/- buttons)

l         Enjoy music using the headset

Enjoy the music on mobile

If your mobile supports MP3 and A2DP, when the match is successful, you can use headset to enjoy MP3 music that the mobile plays.

Notes: if the mobile supports AVRCP, user can select PREVOUS,  NEXT song, or STOP/PLAY the music.

l         Enjoy music in the computer

If the computer supports bluetooth function or is configured bluetooth adapter, when it is matched with the headset(for details please refer to instructions of adapter), you can use headset to enjoy the music that the computer Plays. You can also connect AUDIO OUT with the jack of your headset, then you can enjoy the melody from your mobile or computer. And you can select PREVIOUS, NEXT song, or STOP/PLAY the music.

l         Receive and end a call

After the headset is started-up, when call comes in, you will hear bell ring, blue indicator will blink fast, short press function button to receive the call,short press function button again to end the call, the moment you will hear bell ring. If another comes in while in a call, short press function button, you can receive the other call and let the first call wait.

Short press function button to end current call and shift to the waiting call.

l         Refuse a call

If you don't want to respond an incoming call, short press function button and hold it for 2 seconds to refuse it, the moment you will hear bell ring.

l         Forward a call

While in a call you can short press function button, then release it when "do..." is heard, the voice is forwarded from the headset to mobile. The same operations also allow you to forward the voice from mobile back to headset.,the moment you will hear the ring(depends on type of mobile).

Notes: to receive and hang up a call, you only need short press function button instead of pressing and holding it, otherwise you may make the headset powered off or enter match mode.

l         Adjust volume

Increase volume

Press VOL+ button to increase volume, repeatedly press it till desirable level. When the volume reaches desirable volume, you will hear bell ring.

Decrease volume

Press VOL_ button to decrease volume, repeatedly press it till desirable level. When the volume reaches desirable volume, you will hear bell ring.

l         Low power

When the headset is started-up and red indicator blinks, indicating power is low, charge the battery hours till red indicator is extinguished.

l         Troubleshooting

If you encounter any problem when using this product, please first refer to this User's Manual, if problem still exists, please power off mobile and headset and restart them, or charge and reset the system.